|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-17-2015, 08:59 PM | #1 |
Senior Member
Join Date: May 2010
Location: Sherman, CT
Posts: 330
|
valve insert and cutter
Hi all; Can anyone tell me the OD of the standard valve seat insert and the recommended cutter size for it. Thanks in advance, Craig.
__________________
" When I was a boy of fourteen, my father was so ignorant I could hardly stand to have the old man around. But when I got to be twenty-one, I was astonished at how much he had learned " Mark Twain. |
01-18-2015, 01:40 AM | #2 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,159
|
Re: valve insert and cutter
original Ford--
40-6057-c 1.6530 --1.6535 od 40-6057-d 1.6330-1.6335 od I would suggest measuring any seats you get before cutting the hole to fit them into |
Sponsored Links (Register now to hide all advertisements) |
|
01-18-2015, 05:57 AM | #3 |
Member Emeritus
Join Date: May 2010
Location: Fitzgerald, Georgia
Posts: 2,204
|
Re: valve insert and cutter
For the original seat ring the cutter blade measures a few 10ths over 1.625. However, it cuts a slightly larger diameter counterbore. The larger diameter seat ring was for salvaging blocks which had a loose ring.
|
01-18-2015, 09:57 AM | #4 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
|
Re: valve insert and cutter
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|