|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-22-2015, 09:31 PM | #1 |
Senior Member
Join Date: May 2010
Location: Tulsa Ok
Posts: 519
|
1955 Fairlane body side moulding clips.
Can someone school me on how they are held to the body? Trim is off but I am hesitant as to how to remove the clips from the body. |
09-23-2015, 12:01 AM | #2 |
Senior Member
Join Date: Aug 2012
Location: Abq, NM
Posts: 3,607
|
Re: 1955 Fairlane body side moulding clips.
I don't have a clue so.... When you find the one that matches yours the picture will hopefully make the answer clear.
http://www.macsautoparts.com/ford_me.../moldings.html |
Sponsored Links (Register now to hide all advertisements) |
|
09-23-2015, 07:18 AM | #3 |
Senior Member
Join Date: May 2010
Location: westbury ny
Posts: 854
|
Re: 1955 Fairlane body side moulding clips.
could you post a picture could have a nut on back could be a spring type also could be tabs in middle that spread outward when squeezed could be multiplies of each
|
09-23-2015, 08:09 AM | #4 |
Senior Member
Join Date: May 2010
Location: Tulsa Ok
Posts: 519
|
Re: 1955 Fairlane body side moulding clips.
Door & Quarter Panel Moulding Clip - Ford Body Styles 59B, 60B, 70B, 73B, 76 & 79B
Click on above image to view full picture(s) Part #: 49-27289-1 Alt Part #: B5A-7021066-A OEM Part #: B5A-7021066-A Price: $2.95 ea. Low Price Guarantee Availability: In Stock Fitment: 1955 thru 1955 See applications below for exact details. Add Items to CartQty: |
09-23-2015, 10:00 AM | #5 |
Member
Join Date: May 2012
Location: Little River, SC
Posts: 37
|
Re: 1955 Fairlane body side moulding clips.
These clips are installed in the square punched holes by inserting the short tab so it abuts the edge of the hole and push in the long tab in to the hole. While holding the clip in place with one hand, insert an awl or
similar tool to spread the long tab tight against its side of the hole. To remove, use a pair of channel lock pliers and grip the ends long ways and squeeze the pliers. The clip should pop right off.
__________________
Brodie Coastal SC |
09-23-2015, 10:38 AM | #6 |
Senior Member
Join Date: May 2010
Location: Tulsa Ok
Posts: 519
|
Re: 1955 Fairlane body side moulding clips.
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|