Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 08-25-2013, 05:20 AM   #1
1 Raggedy Ride
Senior Member
 
Join Date: Aug 2012
Location: Henrietta, New York
Posts: 118
Default 1935 Ford spare tire cover info needed

Could someone please tell me if there was more than one tire/tread band for the 1935 ford spare tire cover........what are the widths of any bands related to tire sizes 6.00-16 & 6.50-16?????....Any & All help appreciated......
__________________
1 RAGGEDY RIDE
1 Raggedy Ride is offline   Reply With Quote
Old 08-25-2013, 10:59 AM   #2
deuce lover
Senior Member
 
deuce lover's Avatar
 
Join Date: May 2010
Location: Southern France
Posts: 5,306
Default Re: 1935 Ford spare tire cover info needed

As far as I know only 1 band was used.Weather or not it will work on a 6.50 not sure.
deuce lover is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 08-25-2013, 12:46 PM   #3
Mike in AZ
Senior Member
 
Mike in AZ's Avatar
 
Join Date: May 2010
Location: Waddell, AZ
Posts: 2,540
Default Re: 1935 Ford spare tire cover info needed

according to the book....2 sizes, one for 6.00 and one for 6.50...all it says...Mike
Mike in AZ is offline   Reply With Quote
Old 08-25-2013, 04:28 PM   #4
1 Raggedy Ride
Senior Member
 
Join Date: Aug 2012
Location: Henrietta, New York
Posts: 118
Default Re: 1935 Ford spare tire cover info needed

Mike, Thanks for the help......what book are you referring to, since I don't have any books yet, for 1935????
__________________
1 RAGGEDY RIDE
1 Raggedy Ride is offline   Reply With Quote
Old 08-25-2013, 05:08 PM   #5
malpais
Senior Member
 
malpais's Avatar
 
Join Date: Aug 2011
Location: Northern Colorado
Posts: 506
Default Re: 1935 Ford spare tire cover info needed

Does a 35 look like this? Fella gave me this when I bought a 39 tranny (no good I'm afraid) from him.

Gordon
Attached Images
File Type: jpg wheel cover.jpg (98.7 KB, 34 views)
__________________
Don't mind learning from my mistakes. Just wish I didn't learn EVERYTHING from my mistakes..
malpais is offline   Reply With Quote
Old 08-25-2013, 05:30 PM   #6
41PICUP
Senior Member
 
41PICUP's Avatar
 
Join Date: May 2010
Location: El Cerrito CA
Posts: 338
Default Re: 1935 Ford spare tire cover info needed

Sponsored Links (Register now to hide all advertisements)
That one is for a 36
41PICUP is offline   Reply With Quote
Old 08-25-2013, 08:25 PM   #7
JM 35 Sedan
Senior Member
 
JM 35 Sedan's Avatar
 
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
Default Re: 1935 Ford spare tire cover info needed

Quote:
Originally Posted by 1 Raggedy Ride View Post
Mike, Thanks for the help......what book are you referring to, since I don't have any books yet, for 1935????
I believe the book Mike is referring to is the 1935-36 Ford Book puplished by the Early Ford V-8 Club of America. You can go to their website and order the book on line. Definitely a must have book if you are working on a 35 or 36 Ford passenger car.
__________________
John

"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein
JM 35 Sedan is offline   Reply With Quote
Old 08-25-2013, 08:29 PM   #8
Mike in AZ
Senior Member
 
Mike in AZ's Avatar
 
Join Date: May 2010
Location: Waddell, AZ
Posts: 2,540
Default Re: 1935 Ford spare tire cover info needed

yep, that's the one, John....thanks....Mike
Mike in AZ is offline   Reply With Quote
Old 08-25-2013, 08:31 PM   #9
Shadetree
Senior Member
 
Shadetree's Avatar
 
Join Date: May 2010
Location: Cottageville, WV
Posts: 1,535
Default Re: 1935 Ford spare tire cover info needed

My spare tire cover won't fit on a 600-16 and I have two of them. I think the raised ridge around the white wall is the problem.
__________________
Son, you will never blow an engine up in high gear.
Shadetree is offline   Reply With Quote
Old 08-25-2013, 09:18 PM   #10
Elmo Rodge
Senior Member
 
Elmo Rodge's Avatar
 
Join Date: May 2010
Location: Salina, Utah
Posts: 325
Default Re: 1935 Ford spare tire cover info needed

Mine measures 5 11/16". Wayno
__________________
Life is not a spectator sport.
Elmo Rodge is offline   Reply With Quote
Old 08-26-2013, 03:16 AM   #11
danliveshere
Senior Member
 
danliveshere's Avatar
 
Join Date: Jul 2010
Location: Cairns , Australia
Posts: 746
Default Re: 1935 Ford spare tire cover info needed

Mine fit on a 600-16 but not 650-16. That is the tire cover will fit the 650-16 but you can't put the face plate in as well. It would be a lot of work to weld a wider lip on all the way around, but I would like to use the 650-16 tyres
danliveshere is offline   Reply With Quote
Old 08-26-2013, 04:37 AM   #12
35ragtop
Senior Member
 
35ragtop's Avatar
 
Join Date: Dec 2010
Location: Gold Coast , Australia
Posts: 249
Default Re: 1935 Ford spare tire cover info needed

Well I cheated , I run 6.50 WW on the car and the spare tire is a 600 B W.
Fits well and you cant tell. - at least its a real spare tire .
35ragtop is offline   Reply With Quote
Old 08-26-2013, 05:41 AM   #13
1 Raggedy Ride
Senior Member
 
Join Date: Aug 2012
Location: Henrietta, New York
Posts: 118
Default Re: 1935 Ford spare tire cover info needed

Thanks to all who replied......unless I can find the wider band, '35 ragtops method might workout to be the best choice for me.............
__________________
1 RAGGEDY RIDE
1 Raggedy Ride is offline   Reply With Quote
Old 08-26-2013, 06:32 AM   #14
jfcrash
Senior Member
 
jfcrash's Avatar
 
Join Date: Sep 2010
Location: Western NY
Posts: 170
Default Re: 1935 Ford spare tire cover info needed

I recently had the problem were the band for my ’35 spare tire a 600-16, would not slip over the tire enough to hold the cover in place. Even without the cover in place, I could not force the band to sit any lower on the tire.

I don’t know what the “Book” width should be for a 1935 600-16….but the band that did not fit had a width of 6 ¼” and the band that does fit and comes over the cover and holds it in place has a width of 6 5/8”.

To be honest, I don’t know if either is correct for ‘35

Hope this helps, Jim
Attached Images
File Type: jpg DSCN1865.jpg (79.9 KB, 44 views)
__________________
______________________________________________
jfc

I couldn't repair the brakes, so I adjusted the horn louder....
jfcrash is offline   Reply With Quote
Old 08-26-2013, 02:38 PM   #15
barnfind
Senior Member
 
Join Date: Jan 2011
Posts: 426
Default Re: 1935 Ford spare tire cover info needed

Let some air out and carry a pump?
barnfind is offline   Reply With Quote
Old 08-26-2013, 03:54 PM   #16
David J
Senior Member
 
David J's Avatar
 
Join Date: Jun 2010
Location: St Croix Falls WI
Posts: 2,080
Default Re: 1935 Ford spare tire cover info needed

The 5 1/4" one is 33-34 . Does it have a stainless band around it's outer center bead ? If yes it's 33 and if it is just the raised bead it's 34 .
Quote:
Originally Posted by jfcrash View Post
I recently had the problem were the band for my ’35 spare tire a 600-16, would not slip over the tire enough to hold the cover in place. Even without the cover in place, I could not force the band to sit any lower on the tire.

I don’t know what the “Book” width should be for a 1935 600-16….but the band that did not fit had a width of 6 ¼” and the band that does fit and comes over the cover and holds it in place has a width of 6 5/8”.

To be honest, I don’t know if either is correct for ‘35

Hope this helps, Jim

Last edited by David J; 08-27-2013 at 03:02 PM. Reason: fix a boo - boo
David J is offline   Reply With Quote
Old 08-26-2013, 07:14 PM   #17
Don Rogers
Senior Member
 
Don Rogers's Avatar
 
Join Date: May 2010
Location: Wildwood, MO. (near St. Louis)
Posts: 1,792
Default Re: 1935 Ford spare tire cover info needed

Here is the correct profile for 35 spare tire cover ring. It was designed for a 6:00 x 16 bias ply tire.

Don Rogers
Attached Images
File Type: jpg 35 tire rim.jpg (26.4 KB, 66 views)
Don Rogers is offline   Reply With Quote
Old 08-26-2013, 08:40 PM   #18
Barn Junk
Senior Member
 
Barn Junk's Avatar
 
Join Date: May 2010
Location: WA state
Posts: 771
Default Re: 1935 Ford spare tire cover info needed

Quote:
Originally Posted by Don Rogers View Post
Here is the correct profile for 35 spare tire cover ring. It was designed for a 6:00 x 16 bias ply tire.

Don Rogers
That's not much help. It has the width from about 5 1/8 to 5 3/4 inches. Now I'm even more confused!!

I did go measure an original 36 ring and it is exactly 5 3/4 inches wide.

Last edited by Barn Junk; 08-26-2013 at 08:46 PM.
Barn Junk is offline   Reply With Quote
Old 08-26-2013, 09:10 PM   #19
Don Rogers
Senior Member
 
Don Rogers's Avatar
 
Join Date: May 2010
Location: Wildwood, MO. (near St. Louis)
Posts: 1,792
Default Re: 1935 Ford spare tire cover info needed

Barn Junk, The drawing is a Ford Motor Company drawing from 1935 and it reflects the allowable tolerences for the band when it is in the extended and contracted position. I'm sorry that it isn't much help to you.
Don Rogers is offline   Reply With Quote
Old 08-27-2013, 05:57 AM   #20
chuck stevens
Senior Member
 
chuck stevens's Avatar
 
Join Date: May 2010
Location: upstate new york
Posts: 758
Default Re: 1935 Ford spare tire cover info needed

They fit these 5.00x16s just right.
Attached Images
File Type: jpg DSCF0613.jpg (96.7 KB, 15 views)
chuck stevens is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:53 AM.