|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-29-2011, 07:37 AM | #1 |
Junior Member
Join Date: Jan 2011
Location: Penrith England
Posts: 6
|
1931 Cabriolet Door latch Spring
My door latch spring has snapped (1931 68B) and I have bought the standard door latch spring (se picture)and can not get it to fit as it will not compress sufficiently to get it past the latch into the gap behind. I am not sure if this is the correct spring as it has more coils than the original fitted.
Will the "Closed Car Door Handle Spring A46125L" from Mikes A Fordable fit or does anyone have a spring I can buy. Many thanks Jon Davidson |
01-29-2011, 11:09 AM | #2 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,172
|
Re: 1931 Cabriolet Door latch Spring
Sponsored Links (Register now to hide all advertisements)
hope it helps you, the motion, and position are similar I have installed the springs with vicegrips, grab 1/2 width, twist to align, push in with screwdriver while releasing vicegrips ---the tabs do not like being bent much, some springs came with U shaped strap to replace tabs broke Last edited by Kurt in NJ; 01-29-2011 at 11:30 AM. Reason: add more |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|