|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-19-2014, 06:36 PM | #1 |
Member
Join Date: Dec 2011
Location: Covington Twp Pa
Posts: 98
|
Torquing head nut then it happened
Doing the final torquing to 55 lbs on nut number 8 in sequence. That threads in block gave away. Won't hold torque. What are my options? Can I leave go( probably not). I really don't want to pull head AGAIN. Can I remove stud use head as a guide to drill for 1/2 13 tape . Then drill out head to 1/2 so the oversize stud will slide down and finally tap block.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|