|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-26-2012, 11:50 PM | #1 |
Junior Member
Join Date: Jun 2012
Location: Long Beach CA.
Posts: 27
|
41-48 body to frame pads placement
I will be mounting a 46 tudor body onto a 41 frame in the near future and I need a diagram of what pads go where. I have the venders diagram that I got with the mounting pad set but it does not show in detail. I figured out the front and center of the frame but The main issue I'm having is with the 2 center mounts in the trunk. Does any one have a picture or diagram they can share?
Thank you! |
06-27-2012, 01:17 PM | #2 |
Senior Member
Join Date: May 2010
Posts: 1,647
|
Re: 41-48 body to frame pads placement
I think 1941 frame/body mounting was unique, whereas 1942-48 were all the same. Which mounting pad set are you trying to use?
|
Sponsored Links (Register now to hide all advertisements) |
|
06-28-2012, 06:27 PM | #3 |
Junior Member
Join Date: Jun 2012
Location: Long Beach CA.
Posts: 27
|
Re: 41-48 body to frame pads placement
thanks Randy, I have both 41 and 46 mounting kits. The 41 mounts are much shorter than the 46 ones so I'm trying to mix and match but i was hoping for a pic or a link to view a blown up diagram. the pic below shows the difference between the 41 and 46 mount, maybe i need to cut down the 2 center mounts...hope not. Thanks
|
06-29-2012, 05:32 PM | #4 |
Junior Member
Join Date: Jun 2012
Location: Long Beach CA.
Posts: 27
|
Re: 41-48 body to frame pads placement
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|