|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-27-2019, 02:03 PM | #1 |
Senior Member
Join Date: Feb 2018
Posts: 133
|
1938 ford pickup
Iam fitting my rear end up in my truck and don t have the box together and was wondering if anyone knows the measurement of the outside of the right fender to the outside of left fender Thanks Tom
|
01-27-2019, 03:57 PM | #2 |
Senior Member
Join Date: Apr 2012
Location: Palestine, Texas
Posts: 181
|
Re: 1938 ford pickup
found online for shipping
1938 ford pickup Length: 5.23 m 17.15 Feet Width: 1.83 m 6 Feet Height: 1.73 m 5.67 Feet I don't know if that helps, but it is what I found with a quick search online. I can't go measure mine because I am in the Philippines.
__________________
John Live for today, but save for tomorrow! |
Sponsored Links (Register now to hide all advertisements) |
|
01-27-2019, 06:19 PM | #3 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,755
|
Re: 1938 ford pickup
If it's the same as my 41: (Which I believe it should be).
The width across the bed rails is 54". Each fender sticks out 10" from the bed rail so the width is 54 + 10 + 10 which = 74" or 6' 2". Good job I went to school in pre metric days. Mart. |
01-27-2019, 10:27 PM | #4 |
Senior Member
Join Date: May 2010
Location: Fairfax, VA
Posts: 3,393
|
Re: 1938 ford pickup
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|