|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-31-2016, 08:50 PM | #1 |
Junior Member
Join Date: May 2016
Posts: 9
|
Alternator belt
I have a 47 flathead that has the converted generator to just a alternator. It's the single belt that runs both water pumps, crank pulley as well as the new style alternator. The old belt and part of the crank pulley were destroyed going down the road. Does anybody have an idea what the belt number is that will work for this application? I know it's the wide style pulley and just running a rope around the path measures about 47". Thanks
|
05-31-2016, 09:25 PM | #2 |
Senior Member
Join Date: Feb 2013
Location: Pittsford NY. USA
Posts: 1,096
|
Re: Alternator belt
I have that setup on a '39 engine . I don't know if the belt measures 47 " or not . I can/will get the # an brand name off the belt for you in the morning .
|
Sponsored Links (Register now to hide all advertisements) |
|
05-31-2016, 09:34 PM | #3 |
Junior Member
Join Date: May 2016
Posts: 9
|
Re: Alternator belt
Thanks, I just don't have a lot info to go off of
|
06-01-2016, 01:44 AM | #4 |
Senior Member
Join Date: May 2010
Location: South Orange County, Ca.
Posts: 685
|
Re: Alternator belt
On my '47 it's running a Gates TR22553 (Width (In): 0.688 Inch Outside Circumference (In): 55.910 Inch)
Cross Ref: Dayco 22555 Goodyear 22560 |
06-01-2016, 08:12 AM | #5 |
Junior Member
Join Date: May 2016
Posts: 9
|
Re: Alternator belt
Thanks
|
06-01-2016, 08:19 AM | #6 |
Senior Member
Join Date: Feb 2013
Location: Pittsford NY. USA
Posts: 1,096
|
Re: Alternator belt
Sponsored Links (Register now to hide all advertisements)
|
06-01-2016, 09:34 AM | #7 |
Junior Member
Join Date: May 2016
Posts: 9
|
Re: Alternator belt
Thanks for the help guys
|
06-01-2016, 03:07 PM | #8 |
Member
Join Date: Jul 2010
Location: Sugar Land, TX
Posts: 80
|
Re: Alternator belt
I use a Dayco # B-52 works great.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|