|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-01-2024, 09:29 AM | #1 |
Senior Member
Join Date: Oct 2012
Location: Eastcoast
Posts: 864
|
36 body to frame. Which holes?
I am putting a 36 five window body on a 36 frame.
Does the cowl bolt to the front holes or the rear holes. It seems it needs to go to the front ones. For the radiator I am thinking it should go to the rear holes, is this correct? Should the rear two bumper brackets be bolted to the frame before putting the body on? Or does this matter? |
04-01-2024, 04:28 PM | #2 |
Senior Member
Join Date: Oct 2012
Location: Eastcoast
Posts: 864
|
Re: 36 body to frame. Which holes?
There are two holes in the frame 2.5 inches apart, right where the cowl feet bolt to the frame. I always thought it was the rear two but now I’m thinking it might be the front two that the cowl bolts to.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-01-2024, 04:46 PM | #3 |
Senior Member
Join Date: Aug 2021
Location: Upstate N.Y.
Posts: 444
|
Re: 36 body to frame. Which holes?
|
04-01-2024, 05:02 PM | #4 |
Senior Member
Join Date: Oct 2012
Location: Eastcoast
Posts: 864
|
Re: 36 body to frame. Which holes?
OK, thanks.
That’s what I thought. The rear bumper brackets that are still on the frame are not touching the body at the back |
04-01-2024, 06:31 PM | #5 |
Senior Member
Join Date: Aug 2021
Location: Upstate N.Y.
Posts: 444
|
Re: 36 body to frame. Which holes?
Your welcome.
Do you have the correct Rubber & Cock body pads ? |
04-01-2024, 06:33 PM | #6 | |
Senior Member
Join Date: May 2015
Posts: 8,232
|
Re: 36 body to frame. Which holes?
Sponsored Links (Register now to hide all advertisements)
Quote:
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
04-05-2024, 07:24 AM | #7 |
Senior Member
Join Date: Oct 2012
Location: Eastcoast
Posts: 864
|
Re: 36 body to frame. Which holes?
|
04-05-2024, 09:07 AM | #8 |
Senior Member
Join Date: Aug 2021
Location: Upstate N.Y.
Posts: 444
|
Re: 36 body to frame. Which holes?
Ok, but the neoprene is a few different thickness . Not all the same thickness
|
04-25-2024, 09:37 AM | #9 |
Senior Member
Join Date: Oct 2012
Location: Eastcoast
Posts: 864
|
Re: 36 body to frame. Which holes?
I have a supplier that sells me scrapes. Great for cutting long strips. Different thicknesses
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|