|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-20-2012, 11:16 PM | #1 |
Senior Member
Join Date: May 2010
Location: Wheaton, IL (west chicago)
Posts: 558
|
Bad Luck / Good Luck
Bad Luck:
Lost the choke lever spring and plunger out of my 94 Holley Good Luck: Found the plunger on the shop floor yesterday, found the spring on the shop floor today Bad Luck: Putting the heads back on the '40 24-stud and just now noticed one of the shorter studs is all boogered up. Good Luck: I was able to borrow a stud extractor set from Auto Zone Bad Luck: Even with heat and penetrating oil, the stud wouldn't budge and the stud extractor gave me enough grip on the stud to snap it off cleanly and level with the head surface. Good Luck: I have the tools and the experience to drill and tap it.. And more good luck: it turned out fine and the gasket and head fit cleanly over a stud placed in the newly drilled and tapped hole. One more hurdle cleared and progress continues...
__________________
36 1/2 ton pickup on 38 car frame with 1940 v8 24 stud |
|
|
Sponsored Links (Register now to hide all advertisements) |
|