The Ford Barn

Yoyodyne · 03-03-2012, 06:06 PM

I want to send a press on cam out for regrinding. The one I have measures from 1.793 to 1.797 on the journals. What is standard size, and what is acceptable?

Brian · 03-03-2012, 10:08 PM

Standard size is 1.796" - 1.797"
Wear limit for stock bearings is 1.795"
Replacement bearings are available in .010",.020" &.030".
Brian

Yoyodyne · 03-04-2012, 09:29 PM

Sponsored Links (Register now to hide all advertisements)

Thanks Brian, I found the bearings, and know what to do.

03-03-2012, 06:06 PM	#1
Yoyodyne Senior Member Join Date: Nov 2010 Location: Lancaster PA Posts: 535	Cam journal diameter - what is OK? I want to send a press on cam out for regrinding. The one I have measures from 1.793 to 1.797 on the journals. What is standard size, and what is acceptable?

03-03-2012, 10:08 PM	#2
Brian Senior Member Join Date: May 2010 Location: Masterton, New Zealand Posts: 3,834	Re: Cam journal diameter - what is OK? Standard size is 1.796" - 1.797" Wear limit for stock bearings is 1.795" Replacement bearings are available in .010",.020" &.030". Brian

03-04-2012, 09:29 PM	#3
Yoyodyne Senior Member Join Date: Nov 2010 Location: Lancaster PA Posts: 535	Re: Cam journal diameter - what is OK? Sponsored Links (Register now to hide all advertisements) Thanks Brian, I found the bearings, and know what to do.