|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
05-24-2010, 02:20 PM | #1 |
Member
Join Date: May 2010
Posts: 82
|
George "Skip" Haney Water pumps
Just got a set of rebuilt Skip water pumps. The job is professional looking and response time was great. George is certainly an asset to the flathead community. Thanks again for a great job
Bill |
05-24-2010, 02:50 PM | #2 |
Senior Member
Join Date: May 2010
Location: Minnesota, USA
Posts: 138
|
Re: George "Skip" Haney Water pumps
I second this comment. Skip also did good work on the water pumps for my '36 coupe! Scott
|
Sponsored Links (Register now to hide all advertisements) |
|
05-24-2010, 03:41 PM | #3 |
Senior Member
Join Date: May 2010
Location: SLC Utah
Posts: 798
|
Re: George "Skip" Haney Water pumps
Four pair here. Never looked back...
|
05-24-2010, 04:14 PM | #4 |
Senior Member
Join Date: May 2010
Location: At my kitchen table in Santa Rosa, Ca
Posts: 2,904
|
Re: George "Skip" Haney Water pumps
i just had him rebuild a coil for my 36 truck, good service and fast turnaround!
|
05-24-2010, 04:17 PM | #5 |
Senior Member
Join Date: May 2010
Location: Cape Cod Ma.
Posts: 129
|
Re: George "Skip" Haney Water pumps
Five coils all great......Bob
|
05-24-2010, 04:34 PM | #6 |
Senior Member
Join Date: May 2010
Location: pittsfield, MA
Posts: 2,086
|
Re: George "Skip" Haney Water pumps
Sponsored Links (Register now to hide all advertisements)
|
05-24-2010, 04:39 PM | #7 |
Senior Member
Join Date: May 2010
Location: Gerrardstown, WV
Posts: 2,266
|
Re: George "Skip" Haney Water pumps
2 sets of pump and 1coil for me. Very good!!
|
05-24-2010, 04:47 PM | #8 |
Senior Member
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,009
|
Re: George "Skip" Haney Water pumps
One coil for me. It works great. Fires up as soon as I hit the switch.
|
05-24-2010, 04:51 PM | #9 |
Senior Member
Join Date: May 2010
Location: Michigan
Posts: 505
|
Re: George "Skip" Haney Water pumps
If you got a flathead you gotta get his pumps. Even Henry would approve.
|
05-24-2010, 05:22 PM | #10 |
Senior Member
Join Date: May 2010
Location: HATBORO,PA
Posts: 154
|
Re: George "Skip" Haney Water pumps
his pumps are the cats pajamas!
__________________
HOILER AUTO REPAIR est 1918 https://www.facebook.com/pages/HOILER...16725868370435 |
05-24-2010, 09:11 PM | #11 |
Senior Member
Join Date: May 2010
Location: Prescott, WI
Posts: 336
|
Re: George "Skip" Haney Water pumps
|
05-24-2010, 09:20 PM | #12 |
Senior Member
Join Date: May 2010
Location: Gerrardstown, WV
Posts: 2,266
|
Re: George "Skip" Haney Water pumps
|
05-24-2010, 09:32 PM | #13 |
Senior Member
Join Date: May 2010
Location: Prescott, WI
Posts: 336
|
Re: George "Skip" Haney Water pumps
Thanks Cecil....Joe
|
05-24-2010, 09:40 PM | #14 |
Senior Member
Join Date: May 2010
Location: Daytona Beach, Fl & Spencer, W. Va,
Posts: 4,442
|
Re: George "Skip" Haney Water pumps
Skip also markets an overflow pipe valve. It keeps water from being thrown out the overflow pipe on trips, etc. My '35 was bad about getting hot, being that the water would keep getting lower, the longer I drove it. Now, with his pumps and valve, I have no heating problems at all.
MIKE |
06-03-2010, 06:34 AM | #15 |
Senior Member
Join Date: May 2010
Location: Powell, TN
Posts: 2,509
|
Re: George "Skip" Haney Water pumps
I have one of skips overflow valves on my 32 Ford and 29 Packard, they work great and solved the overflow problem.
|
06-03-2010, 08:00 PM | #16 |
Senior Member
Join Date: May 2010
Location: Napier, New Zealand
Posts: 2,001
|
Re: George "Skip" Haney Water pumps
Not trying to start a riot, but how do Speedway and Drakes pumps compare to Skips? The reason I ask is they are both already available here in New Zealand.
|
06-04-2010, 07:33 AM | #17 |
Senior Member
Join Date: May 2010
Location: Suth'N Maine
Posts: 1,996
|
Re: George "Skip" Haney Water pumps
Bassman, I had THE Walt Dupont rebuild my 59AB, the drake pumps I had were off a 1/2 hole to bolt on the block. We shipped my originals to skip and a week later they were back!! I've since returned the drake pumps, when I find a decent orig. pair of pumps I will send those out for a future motor. Listening to folk's on the barn, not much beat the original part. Drake has fixed the prob. W/the pumps. They were great to deal with!!
|
05-25-2010, 03:11 PM | #18 | |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,859
|
Re: George "Skip" Haney Water pumps
Quote:
I just received my set of Skip Haney rebuilt '37-'48 Ford water pumps as well. I mailed these to Skip Monday before last, May 17, Priority Mail, Flat Rate Box and received them back yesterday, Monday, May 24th. He did an absolute beautiful job on these pumps. See pictures attached. And guess what......they fit my 59ab engine perfectly. No need to worry about holes not being cast or reamed correctly because they are the original 78-_ _ _ _ pn, made in the USA pump housings, and not the alternative made in China versions that are being sold by all the big, well known vendors. They will also cool the engine better than the original pumps and are guaranteed for 5 years or more. They came with two new gaskets and an instruction sheet on how/what to do to get max cooling from these high flow water pumps. What more could you ask for and where else would you get this kind of service or turn around time? If you need water pumps for your Flathead, do yourself a favor and send your old cores to Skip for a rebuild. You will not be sorry you did. JM
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
|
05-25-2010, 03:17 PM | #19 |
Junior Member
Join Date: May 2010
Location: Obrien Co. Iowa
Posts: 25
|
Re: George "Skip" Haney Water pumps
Got my water pumps done and rebuild distributor on my '36 last year....It doesn't get any better than Skip !!!!
|
05-25-2010, 03:41 PM | #20 |
Junior Member
Join Date: May 2010
Location: Central NJ
Posts: 27
|
Re: George "Skip" Haney Water pumps
He rebuilt my coil and set the rebuilt distributor I already had. Started the car for the first time last night after installing the parts and it fired right up. I'm looking forward to a summer where the car will start when it's hot.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|