|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-29-2020, 09:55 AM | #16 |
Senior Member
|
Re: Slamming into first gear
It’s either your clutch not disengaging because of adjustment, or failed clutch lever, or your pilot brg needs changing.
Both are common problems. To change the pilot brg, you have to pull the engine or rear end. Rule out the linkage and adjustment first. Easy fix. Good luCo. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|