The Ford Barn

Glenn Thoreson · 11-15-2021, 09:13 PM

Sponsored Links (Register now to hide all advertisements)

These are for the 221 Cu. In. V-8 engine. New in the box with instructions and the rare "Happy Cabbage" 20 point coupon.
I think I have a set of NOS Ford rings for the same engine. I'll have to look.
Same price - 35.00 plus postage.
I also have a crankshaft for these engines. Mains - .020 Rods - .030 Mic check says good to go as is. Best picked up in SW. Wyoming or you find a ride. 75.00.
I have a coffee can with a bunch of used bearings for these engines, too. All look good. 20 bucks plus the ride.
2 sets of rods for same. 1 set has standard big ends mic checked, std., nice and smooth. piston pin bushings may be usable as is. 50.00
The other set has had the big ends honed for .008 oversize bearings and may be re-sizable. Smooth bearing surfaces. 40.00

11-15-2021, 09:13 PM	#1
Glenn Thoreson Senior Member Join Date: May 2010 Posts: 203	NORS '38-'42 Leakproof piston rings 3 1/16 STD. etc. City: Cokeville State: WY Price: 35.00 Sponsored Links (Register now to hide all advertisements) These are for the 221 Cu. In. V-8 engine. New in the box with instructions and the rare "Happy Cabbage" 20 point coupon. I think I have a set of NOS Ford rings for the same engine. I'll have to look. Same price - 35.00 plus postage. I also have a crankshaft for these engines. Mains - .020 Rods - .030 Mic check says good to go as is. Best picked up in SW. Wyoming or you find a ride. 75.00. I have a coffee can with a bunch of used bearings for these engines, too. All look good. 20 bucks plus the ride. 2 sets of rods for same. 1 set has standard big ends mic checked, std., nice and smooth. piston pin bushings may be usable as is. 50.00 The other set has had the big ends honed for .008 oversize bearings and may be re-sizable. Smooth bearing surfaces. 40.00