|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-28-2023, 10:05 AM | #1 |
Senior Member
Join Date: May 2010
Location: Rogersville, TN
Posts: 797
|
32 Roadster Windshield frame holes
I have a new Trautwein windshield frame for my roadster, and want to add stock style rear view mirror and finger pulls.
Can anyone give me the hole locations? From either the center or outer edge. Presume the mirror is centered and holes simply located to match. What about the finger pulls? Thanks! Bill |
07-28-2023, 10:23 AM | #2 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: 32 Roadster Windshield frame holes
Only the standard '32 roadster had an inside rear view mirror (the deluxe roadster had a windshield post-mounted outside mirror). If an inside mirror is what you want, it was centered in the top of the windshield frame. The finger pulls were located 10" from each bottom corner (measured in a straight line).
|
Sponsored Links (Register now to hide all advertisements) |
|
07-28-2023, 10:53 AM | #3 |
Senior Member
Join Date: May 2010
Location: Rogersville, TN
Posts: 797
|
Re: 32 Roadster Windshield frame holes
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|