The Ford Barn

34fordpu · 12-15-2017, 03:55 PM

I have started to inspect and repair some rust on the cab of my 34 truck. I have been looking for replacement floor pans/braces and patch panel’s, but I don’t really know what is available. I can’t seem to find much!

Any input would be greatly appreciated.

FlatheadTed · 12-15-2017, 05:57 PM

https://brookvilleroadster.com/models/28-32-pickup/

Flathead Fever · 12-15-2017, 07:28 PM

You can try Howells Sheet metal. They have the floor panel under the seat riser for the pickups and lots of other cab patch panels. I didn't see the rusty ones you showed in the photos but it wouldn't hurt to give them a call. They might have been the ones I saw at this year's LA Roadster Show or GNRS that were going to reproduce the entire cab.

http://fordor.com/category.cfm?cat=1...&dept=3246ford

rotorwrench · 12-16-2017, 11:44 AM

The 32 through 34 are a lot alike so at least there is some stuff available. Pickups don't have a lot of complex shapes in the floor structure so patches shouldn't be hard to form. A person just has to find some 18-gauge steel sheet.

34fordpu · 12-16-2017, 05:40 PM

I just wanted to make sure I wasn't missing anything.
Howell's sheet metal looks to have the best selection for some other parts I was looking for. I will see what I can make for the rest!
Thanks again!!!

JSeery · 12-16-2017, 05:55 PM

Sponsored Links (Register now to hide all advertisements)

I would look at R & Js stuff, Arkansas City KS.

12-15-2017, 05:57 PM	#2
FlatheadTed Senior Member Join Date: May 2010 Location: Auckland Posts: 4,705	Re: rust repair/ floor parts https://brookvilleroadster.com/models/28-32-pickup/ __________________ http://www.flatheadted.com Flathead Ted brake Floaters ,

12-15-2017, 07:28 PM	#3
Flathead Fever Senior Member Join Date: May 2010 Location: Yucaipa, CA Posts: 1,095	Re: rust repair/ floor parts You can try Howells Sheet metal. They have the floor panel under the seat riser for the pickups and lots of other cab patch panels. I didn't see the rusty ones you showed in the photos but it wouldn't hurt to give them a call. They might have been the ones I saw at this year's LA Roadster Show or GNRS that were going to reproduce the entire cab. http://fordor.com/category.cfm?cat=1...&dept=3246ford

12-16-2017, 11:44 AM	#4
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,440	Re: rust repair/ floor parts The 32 through 34 are a lot alike so at least there is some stuff available. Pickups don't have a lot of complex shapes in the floor structure so patches shouldn't be hard to form. A person just has to find some 18-gauge steel sheet.

12-16-2017, 05:40 PM	#5
34fordpu Junior Member Join Date: Nov 2017 Location: Maryland Posts: 17	Re: rust repair/ floor parts I just wanted to make sure I wasn't missing anything. Howell's sheet metal looks to have the best selection for some other parts I was looking for. I will see what I can make for the rest! Thanks again!!!

12-16-2017, 05:55 PM	#6
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: rust repair/ floor parts Sponsored Links (Register now to hide all advertisements) I would look at R & Js stuff, Arkansas City KS.