Need help

[theriddler56]

There were some articles on upgrading a banjo axle to modern axles and brakes.
I need help finding the articles. Appreciate any help.

Stephen

[Bob C]

Something like this? https://www.hotrodworks.com/product/...e-ford-brakes/

[petehoovie]

Originally Posted by Bob C

Something like this? https://www.hotrodworks.com/product/...e-ford-brakes/

[theriddler56]

Yes an upgrade like the one pictured. I am aware of Hot Rod Works setup. There were some articles posted in the past on Ford Barn by members who have done the machining / fabrication themselves, however I can’t seem to find their posts.

[Bob C]

Here's an article on the HAMB. https://www.jalopyjournal.com/forum/...-axles.380478/

[A bones]

Sponsored Links (Register now to hide all advertisements)

As I have seen posted by other members, re- post
( since I believe there is no provision to change, edit, a title )
using your need in he heading.
Should bring a quicker response

Kudos to Bob C and Jalopy Journal

[theriddler56]

Originally Posted by Bob C

Here's an article on the HAMB. https://www.jalopyjournal.com/forum/...-axles.380478/

Appreciate the link. I have a question about using the 7.5 Ford axle side gears. They measure 1.74” is there enough meat in the ring gear and differential to remove what’s needed to install them. I understand that Hot Rod Works gear are custom made for this application and measure 1.6” thus leaving more material.
Opinions gratefully appreciated.

Thanks,

Stephen

[Ronnieroadster]

Originally Posted by theriddler56

Appreciate the link. I have a question about using the 7.5 Ford axle side gears. They measure 1.74” is there enough meat in the ring gear and differential to remove what’s needed to install them. I understand that Hot Rod Works gear are custom made for this application and measure 1.6” thus leaving more material.
Opinions gratefully appreciated.

Thanks,

Stephen

Having converted a lot of banjo rears to drop in axles for the street and for the family race car which has run as fast as 229 MPH with our simple back yard conversions. I can help you with some information.
The hot rod works side gears are custom made only in the area where they mesh with the early Ford spider gears. The hub diameter is not special its the same size as the 8 inch and 9 inch Ford side gears. If your idea is to use the 7.5 side gears your going to be in uncharted waters.

Question are you sure the 7.5 side gears will mesh correctly with the Ford banjo spiders?
Never had a need to try them so I'm not sure.
Ronnieroadster

[cas3]

If you search the hamb you will find many discussions about this topic. In one, JSEARY, whom we have not heard from since June, had some other side gears he was using that he claimed fit as good as the Idaho ones. Sorry, I cant remember what he was using, but jerry was no dummy

[40cpe]

I'm reluctant to post this, but JSeery was a frequent contributor here on the 'Barn and I took every post he made to heart. This obituary matches his biography on his profile. It looks like Jerry and his mother and father all passed within a couple of years. My condolences to their family.
https://www.legacy.com/us/obituaries...ry?id=36924557

[petehoovie]

40cpe > "I'm reluctant to post this, but JSeery was a frequent contributor here on the 'Barn and I took every post he made to heart. This obituary matches his biography on his profile. It looks like Jerry and his mother and father all passed within a couple of years. My condolences to their family.
https://www.legacy.com/us/obituaries...ry?id=36924557"

Jerry Seery

1947 - 2022