|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
02-08-2015, 04:11 PM | #1 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Hydraulic Brakes
Hello all, I have all the bits and pieces I need to install 1948 Lincoln 'hydrochloric" Brakes on my Modal A but I've heard mixed reports from several people, the opinions of some of whom I respect. Are they better than the originals? I know that originals properly adjusted and maintained work well but do the larger (by 1") drums work better?
I have seen a Model A with a vacuum booster connected to the cross shaft for extra whoa. The owner says it works well with good feel. Is this a good way to go? My car is a DRIVER so originality is not important Would this be a good way to go for less hassle? I would appreciate informed comments, preferably from those who have installed them. Although I am running original wheels and tyres at the moment, I will be fitting 16" wheels with radial tyres later. I'm hoping that the hydraulic brakes will be good enough to get the benefit that these tyres offer in better braking out of them. I'm not convinced that the original brakes, no matter how well set up would be able to lock the 16" tyres on a dry road.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
02-08-2015, 04:30 PM | #2 | |
Senior Member
Join Date: Jul 2010
Location: Cow Hampshire
Posts: 4,188
|
Re: Hydraulic Brakes
With stock Model A brakes, the limitation on stopping is the square inches of rubber contacting the road.
No matter how much you think you can improve stopping by installiing hydraulic brakes, you can't get past where the rubber meets the road. You may in fact degrade stopping over strict mechanical brakes the car came with originally. My own thought on this was to install 1940-1947 Ford Hydraulics using the later backing plates, drums, shoes, all pasted onto the Model A spindles. These are brakes for a car that weighed on the order of 2x the weight of the Model A. And then I realized how hydraulic brakes installed as a direct transfer was putting MORE of a tendency to skid based on the challenged footprint. And once you skid - controlled braking is DONE. So I gave it up. The backing plates, hubs, drums and master were all discarded. And instead I worked on improving the existing mechanical brakes. Quote:
But cast iron drums another matter entirely compared to original. And 16" tires still present about the same area of contact to the road - a little better "contact aspect" perhaps. Think of the tire pressure at 35 psi. To support a 2000 lb car requires 57.1 square inches of tread. It will be a little harder to skid 16" tires, based on their contact aspect, but only a little. Joe K
__________________
Shudda kept the horse. |
|
Sponsored Links (Register now to hide all advertisements) |
|
02-08-2015, 04:46 PM | #3 |
Senior Member
Join Date: Sep 2012
Location: CA
Posts: 206
|
Re: Hydraulic Brakes
Not worth the hassle and expense no matter what you may hear ! I've had hydraulics on several A's over the past 50 years. I would never switch to them. I have them on my 29 pickup and would gladly trade for stock if anyone wanted to do the work of changing. I may change them myself later this year.
|
02-08-2015, 06:15 PM | #4 |
Senior Member
Join Date: Aug 2011
Location: Hickory Tavern , SC
Posts: 422
|
Re: Hydraulic Brakes
Just slow down and enjoy the drive ,.., you don't want all those leaking wheel cylinders , , smelly fluid ,. help me pump it up ,,. pedal goes to floor ,.,.,, moisture in fluid ,.,.., I think its the master cylinder ,.., the bleeder just broke off ,. ,..,.
.,,.,. good originals .,., ,.,.
__________________
Sometimes I want to say ,,You should have bought a Shay. |
02-08-2015, 06:35 PM | #5 | |
Senior Member
Join Date: May 2010
Location: Central, IL
Posts: 3,968
|
Re: Hydraulic Brakes
Quote:
__________________
1929 Model AA - Need long splash aprons! |
|
02-08-2015, 06:46 PM | #6 |
Senior Member
Join Date: May 2010
Location: PASADENA, CA
Posts: 1,885
|
Re: Hydraulic Brakes
Sponsored Links (Register now to hide all advertisements)
You will be surprised how good the brakes are. I have other cars that have been converted to hydraulics and I am for ever fighting leaking wheel cylinders etc. My Model A is always ready to go no matter how long it has been sitting. I would never convert a Model A to hydraulics now that we have good components available to properly fix the mechanicals. My opinion, Chris W. |
02-08-2015, 07:13 PM | #7 |
Senior Member
Join Date: Jul 2012
Location: Central Maine
Posts: 644
|
Re: Hydraulic Brakes
Put some of the effort, time and money you would expend installing the hydraulic brakes on your A into making sure your original brakes are in top condition. You will be pleased.
|
02-08-2015, 07:17 PM | #8 |
Senior Member
Join Date: Oct 2014
Location: Charlotte, NC
Posts: 310
|
Re: Hydraulic Brakes
I've driven the A's with mechanical brakes for 30 years and wouldn't switch. Sure you have to be aware, but if adjusted and in good shape they stop the car as Ford intended.
|
02-08-2015, 07:34 PM | #9 |
Senior Member
Join Date: May 2010
Location: Fort Worth, Texas
Posts: 1,055
|
Re: Hydraulic Brakes
Just got done converting a car. Its a pain in the ass, and in my opinion is not worth the trouble. A well restored mechanical brake will work just as good as a hydraulic brake.
__________________
Cowtown A's |
02-08-2015, 08:57 PM | #10 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: Hydraulic Brakes
Thanks for the replies, Guys. Sounds like I was right to respect the opinions of those guys who weren't keen on the idea. I have cast Iron drums and new woven linings coming for the brakes so it seems I will have the best possible shot at having them work well I also have old drums to cut a hole in to centre the shows properly. It all looks good. I'm tired of hearing my wife screaming!!!!!!
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. Last edited by Synchro909; 02-10-2015 at 03:25 PM. |
02-08-2015, 09:15 PM | #11 |
Senior Member
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,906
|
Re: Hydraulic Brakes
Mechanical brakes make you a safer driver.
__________________
Ray Horton, Portland, OR As you go through life, keep your eye on the donut, not the hole. |
02-08-2015, 09:34 PM | #12 |
Senior Member
Join Date: Jan 2015
Location: New York
Posts: 943
|
Re: Hydraulic Brakes
I have heard that some have gone back to mechanical brakes after they switched, I was told to just fix my present brakes which I will do with cast iron drums instead of the steel, and my steel still stopped even though they were in bad condition. Iam not switching to hydraulics.
|
02-08-2015, 10:03 PM | #13 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 1,375
|
Re: Hydraulic Brakes
The 1940 Ford hydraulics on my coupe were installed by a previous owner so I am dancing (or braking) with the one that brought me. I have looked for a decent set of original Model A brakes but have only found incomplete sets of cast-off junk. I don't want to be piecing together a braking system from random bits, especially as I have no mechanical experience with originals. However, if a rodder wants to unload the complete brakes or rolling chassis from his "project" I would be interested. Just my perspective.
|
02-08-2015, 09:59 PM | #14 |
Senior Member
Join Date: May 2010
Location: Durango CO
Posts: 1,309
|
Re: Hydraulic Brakes
Posted this before; never had leaky cylinders in 20+ years with hydraulic brakes. I have had serious brake fade with stock brakes.
Let's put this issue in context: if your putting around on back roads, stock brakes are fine. If you're running in serious traffic with 80+ HP, go with hydraulics.
__________________
No restorable Model A's were harmed in the building of this truck! Last edited by denis4x4; 02-08-2015 at 10:04 PM. Reason: Typos |
02-08-2015, 10:07 PM | #15 |
Senior Member
Join Date: Sep 2010
Location: South Coast NSW Australia
Posts: 2,596
|
Re: Hydraulic Brakes
Think of the tire pressure at 35 psi. To support a 2000 lb car requires 57.1 square inches of tread.
I have never ever heard of this equation in my life. Sounds a bit made up to me. Any facts on this available ? |
02-08-2015, 11:10 PM | #16 | |
Senior Member
Join Date: Jul 2010
Location: Cow Hampshire
Posts: 4,188
|
Re: Hydraulic Brakes
Quote:
http://exploratorium.edu/snacks/tired_weight/index.html Joe K
__________________
Shudda kept the horse. |
|
02-08-2015, 11:18 PM | #17 |
Senior Member
Join Date: Sep 2010
Location: Danville, CA
Posts: 1,554
|
Re: Hydraulic Brakes
I have proven (to myself and my wife) that when you run into the car ahead of you, it is immaterial whether you have hydraulic or mechanical brakes. Either will get the job done with enough room in front of you. Neither will if someone jumps in front of you and piles on the brakes with a modern machine. I'd bet the average tire to road ratio on our A's is about 1/4 that of most SUV's, even the smaller ones. If the roadway is wet, all bets are off.
|
02-08-2015, 11:35 PM | #18 |
Senior Member
|
Re: Hydraulic Brakes
Then there is nothing we can say except, some people never let facts get in the way of an opinion.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
02-09-2015, 12:30 PM | #19 |
Senior Member
Join Date: Jun 2010
Location: Temecula, CA
Posts: 4,089
|
Re: Hydraulic Brakes
I have hydraulics on 2 of my A's, and would never go back to originals, especially on a driver. I use silicone fluid, no leaks and doesn't draw moisture. They are 1" bigger in diameter and have wider shoes. Lincoln type are self energising = easier pedal pressure. They were designed for heavier cars so give you more stopping power in reserve. Sure mechanical's will slide stock wheels and work fine at low speeds and no traffic, but your life is at stake. Don't take chances. If possible drive someone's stocker to get a feel of mechanical's and ask how often they need adjusting.
|
02-09-2015, 02:35 PM | #20 | |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,409
|
Re: Hydraulic Brakes
Quote:
Joe K has it right about the size of the tire patch. Not very big on a model A. Here's some data to digest. While not under lab conditions, it was measured as close as a surveyors tape could do. I rigged up a device on the front bumper of my A that would shoot a blank cartridge loaded with white chalk when I pressed the brake pedal. I drove 30 mph on dry concrete, hit the brakes with a modulating force as any driver who has been trained in maximum braking procedure should, and when stopped, measured the distance from the chalk mark to the front bumper device. After 4 runs I averaged the distance. 23 ft. Doing it this way takes the driver's reaction time out of the formula. My A has hydraulic 4 wheel disc brakes. Now let's hear how some mechanical brakes do. Just a tip, if you lock the brakes you will not stop in the shortest possible distance. |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|