|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-03-2018, 01:43 PM | #1 |
Senior Member
Join Date: Jun 2010
Location: Detroit suburb, MI
Posts: 3,706
|
Holley 660 CFM Center Squirter Carb.
City:
Utica
State:
Mich.
Price:
$200
This is a Holley 660 CFM universal center squirter drag race carburetor made by Holley for drag racing on 2x4 tunnel rams. I found it at a local swap meet for a very low price. It was all original and never touched or modified. Has original jets and calibration (blocked power system).
I completely went through the carb and made sure all is correct. Also has great original greenish coloring. All new gaskets, pump diaphragm and o-rings. All ethanol tolerant. Will work on a performance engine with one four barrel also. Recommended for drag racing since it is jetted slightly richer because of no power system. The carb is part number LIST 4224-S, and date code 271 (1st week of July 1972). Holley started making this carb in the 70's for drag racing. Asking $200 (fully guaranteed) plus shipping Thank you, Sal Cicala (586) 612-1650 [email protected] |
09-11-2018, 03:28 PM | #2 |
Senior Member
Join Date: Jun 2010
Location: Detroit suburb, MI
Posts: 3,706
|
Re: Holley 660 CFM Center Squirter Carb.
Btt
|
Sponsored Links (Register now to hide all advertisements) |
|
11-03-2018, 05:46 PM | #3 |
Senior Member
Join Date: Jun 2010
Location: Detroit suburb, MI
Posts: 3,706
|
Re: Holley 660 CFM Center Squirter Carb.
Btt
|
11-29-2018, 05:45 PM | #4 |
Senior Member
Join Date: Jun 2010
Location: Detroit suburb, MI
Posts: 3,706
|
Re: Holley 660 CFM Center Squirter Carb.
Btt
|
01-17-2019, 08:20 PM | #5 |
Senior Member
Join Date: Jun 2010
Location: Detroit suburb, MI
Posts: 3,706
|
Re: Holley 660 CFM Center Squirter Carb.
Sponsored Links (Register now to hide all advertisements)
Last edited by scicala; 01-23-2019 at 02:25 PM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|