|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-03-2022, 07:49 PM | #1 |
Junior Member
Join Date: May 2010
Location: milwaukee
Posts: 21
|
40 ford Original 10in flywheel
Hello
I need a good 10in flywheel for my 40 ford it has the original engine in it as assembled from factory...I was going to replace the clutch. The engine is in the car.I understand there are several types. Can I please get some feedback please. |
11-03-2022, 08:38 PM | #2 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,527
|
Re: 40 ford Original 10in flywheel
Normally it would be 9".
|
Sponsored Links (Register now to hide all advertisements) |
|
11-03-2022, 09:10 PM | #3 |
Senior Member
Join Date: May 2010
Location: so cal, placerville, vegas
Posts: 1,394
|
Re: 40 ford Original 10in flywheel
Original 40 Ford would not have originally had a 10-inch. (As flatjack9 has said)
'Course, you didn't say if it's a 40 truck... that might make a difference. So, I assume you are looking for a 46-48 flywheel (car) which would normally be 10-inch. Or, as flathack9 posted, a 9-inch from 40 and earlier. For whatever it's worth (and I'm only offering, not placing an ad), I have an unused 46-48, 10-inch flywheel and fresh clutch, from a project that I abandoned. Flywheel has been surfaced and balanced. All work done by Clutch Masters, Rialto, CA. And, I also have a 40 (and earlier) flywheel for 9-inch. This one is 'as was', not resurfaced or balanced. |
11-04-2022, 08:46 AM | #4 |
Member
Join Date: May 2010
Location: allison park pa
Posts: 89
|
Re: 40 ford Original 10in flywheel
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|