" last call ".....

[Gerard]

.............Before I bite the bullet for new ones from Snyder

Want to buy . Cash waiting.
============

2 front fenders for a early1930 Murray Drivers side welled ( with the nose pieces ). Must be in Perfect condition , No bondo, dings, broken / repaired beads. Just a repaint job to do is fine with me.

Thanks.

[Gerard]

Btt

[kelley's restoration]

just a little fyi
repo fenders need work
they are not a skuff and shoot
i would rather rework OG fenders then put on or rework new stuff
and yes there is a place in my world for repo stuff
tk

[vtwinsideways]

I have to agree with TK, repo fenders do not fit without doing some serious work to them and they don't look correct (if that's what you're looking for.) A good vendor will tell you not to use new on one side and old on the other because the differences are very noticeable. Luke

[Glenn C.]

Agree with the Barners above 100% Don't waste your time and money on repo fenders

[Gerard]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Gerard

.............Before I bite the bullet for new ones from Snyders I prefer to buy original ones after he advice from you Guy's

Want to buy . Cash waiting.
============

2 front fenders for a early1930 Murray Drivers side welled ( with the nose pieces ). Must be in Perfect condition , No bondo, dings, broken / repaired beads. Just a repaint job to do is fine with me.

Thanks.

Back to top ??