|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-08-2012, 10:29 PM | #1 |
Senior Member
Join Date: May 2010
Location: NE Illinois
Posts: 499
|
28 29 CCPU sun visor
I have a pretty decent frame for my 28 29 CCPU sun visor, but is there a wood kit that it needs to attach the material too?? Not sure how one would attach the cloth to it.
|
01-09-2012, 01:29 AM | #2 |
Senior Member
Join Date: May 2010
Location: Hangtown, CA
Posts: 556
|
Re: 28 29 CCPU sun visor
Your best bet is to buy a pre-sewn cover from one of the Model A suppliers or LeBaron Bonney and follow the installation instructions.
There is no wood associated with the frame itself. The rear of the frame screws to the underside of the wooden front header on the cab. The other mounting points are obvious on each end of the frame. |
Sponsored Links (Register now to hide all advertisements) |
|
01-09-2012, 12:13 PM | #3 |
Senior Member
Join Date: May 2010
Location: Owls Head
Posts: 257
|
Re: 28 29 CCPU sun visor
If I remember correctly, the original cover was slid on the metal frame and then sewn through the 2 open rectangles of the metal frame work. I think I remember this from cutting the stitching of an original to get it off the frame, but that was 1/2 of a century ago so you might want to check it out closer.
__________________
Driving old Fords since 1947 |
01-09-2012, 02:33 PM | #4 |
Senior Member
Join Date: May 2010
Location: Camino, CA.
Posts: 3,086
|
Re: 28 29 CCPU sun visor
Find a shoe repair shop with an open foot sewing machine to do the stiching in the rectangles.
|
01-09-2012, 06:59 PM | #5 |
Senior Member
Join Date: May 2010
Location: Owls Head
Posts: 257
|
Re: 28 29 CCPU sun visor
Sponsored Links (Register now to hide all advertisements)
__________________
Driving old Fords since 1947 |
|
|
Sponsored Links (Register now to hide all advertisements) |
|