Go Back   The Ford Barn > The Swap Meet > For Sale > Early V8
Reload this Page Wanted Fan Pulley assembly thin belt tin pulley type

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-17-2018, 02:56 PM   #1
Ronnieroadster
Senior Member
 
Ronnieroadster's Avatar
 
Join Date: Dec 2010
Location: East Coast in CT
Posts: 1,529
Default Wanted Fan Pulley assembly thin belt tin pulley type
City: Wallingford
State: Connecticut
Price: see ad

Sponsored Links (Register now to hide all advertisements)
Hi Gang Im in need of a fan pulley assembly from the 8BA the style I need has the flat tin pulley for the narrow belt it measures 5-13/16 diameter or if you use a vernier 5.810 the fan mount is also tin. I dont need the fan but if its part of the assembly you may have I will take it. I have no idea what years it was used I have a number of cast narrow belt assembly's but they wont work for what Im doing. Send me a PM with details. Thanks for any help.
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish.
"Life Member of the Bonneville 200 MPH Club using a Ford Flathead block"
Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline.
First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH
Ronnieroadster is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:17 PM.