|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-06-2019, 05:51 PM | #1 |
Senior Member
Join Date: Jan 2012
Location: New Jersey
Posts: 356
|
Radiator bolt clarifaction
HI GUYS , I'm gonna post a picture of some radiator bolts and maybe someone can give me an answer. I pulled my radiator to change my pump and in reinstalling the radiator I used the hardware I took out, I noticed the bolts were milled down from 3/8in. to maybe 1/4 in. they also measured 2and 3/4in. long .I had to add washers so as I could get the castle nuts to fit properly. then I found out there are different lengths available however they are not milled down as you can see from the picture. the only reason I can think of to mill them is maybe to adjust the radiator to align the hood . anyone have any answers?
|
03-06-2019, 07:26 PM | #2 |
Senior Member
Join Date: May 2010
Location: brentwood, ca
Posts: 4,245
|
Re: Radiator bolt clarifaction
Worn-out.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-06-2019, 07:29 PM | #3 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: Radiator bolt clarifaction
Sponsored Links (Register now to hide all advertisements)
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|