The Ford Barn

sphooch · 10-27-2018, 02:11 PM

Hi guys I have a picture of the clamps holding the vacuum line on the windshield , but need the location of the clamps,. maybe starting from the left side of the windshield to the clamps. its a 31 deluxe roadster. also has anyone done this? what precautions do I need as to not hit the glass. thanks the HOOCH

Colonel Biggs · 11-01-2018, 10:34 PM

Sponsored Links (Register now to hide all advertisements)

Sir Hooch --

I have a '31 Deluxe Roadster up in Madison, NJ -- but I am in Houston until early December. There are two clips (chrome), secured by stainless screws (#6 or #8). But, the upper frame of the windshield should already be pre-drilled for these screws. You also have pre-drilled holes on the lower frame for the finger pulls. Is your frame a repro?

If you do not receiive an answer in the interim, feel free to email me in early December.

10-27-2018, 02:11 PM	#1
sphooch Senior Member Join Date: Jan 2012 Location: New Jersey Posts: 356	deluxe roadster windshield clamp Hi guys I have a picture of the clamps holding the vacuum line on the windshield , but need the location of the clamps,. maybe starting from the left side of the windshield to the clamps. its a 31 deluxe roadster. also has anyone done this? what precautions do I need as to not hit the glass. thanks the HOOCH

11-01-2018, 10:34 PM	#2
Colonel Biggs Senior Member Join Date: Jun 2010 Location: Madison, NJ Posts: 156	Re: deluxe roadster windshield clamp Sponsored Links (Register now to hide all advertisements) Sir Hooch -- I have a '31 Deluxe Roadster up in Madison, NJ -- but I am in Houston until early December. There are two clips (chrome), secured by stainless screws (#6 or #8). But, the upper frame of the windshield should already be pre-drilled for these screws. You also have pre-drilled holes on the lower frame for the finger pulls. Is your frame a repro? If you do not receiive an answer in the interim, feel free to email me in early December.