VANPELT transmission school photos

[Mac VP]

There are too many photos (from our cameras) to upload to the Fordbarn, so we have put them into a separate folder on our own website for you to enjoy. Included are two short videos. The group picture now has everyone's name identified. There are 3 total pages so you must click on the little arrows at the upper right corner of each page for Page 2 and Page 3. That link:

http://www.vanpeltsales.com/FH_web/V...School%202023/

Naturally, many of the fellows took their own pictures and those are available under other posts here and over on the HAMB.

[Mac VP]

The photo attachment is somewhat blurred and that may be because of the software uploading with FB due to file size limitations. We’ll create a link to our website with a special section of photos and you’ll be able to see larger images with more clarity. Watch for the update to this later today. Here is that link:

http://www.vanpeltsales.com/FH_web/V...School%202023/

[Tim Ayers]

To Mac, Shelly, Will & George,

Thank you so much for this opportunity and willingness to share your knowledge.

Everyone at the shop were excellent teachers and gracious hosts. I'm looking forward to putting what I learned into good use.

[Seth Swoboda]

Good Job Mac. That was very generous of you.

[petehoovie]

Originally Posted by Mac VP

we took over 300 photos and obviously we are not going to post them all but I’ll upload some later today. For a start you can see the group shot taken before we began the classes.

[Veeder]

Sponsored Links (Register now to hide all advertisements)

Mac
What you and your team have done here is unbelievable and not to ever be forgotten.

[sshep]

Originally Posted by Tim Ayers

To Mac, Shelly, Will & George,

Thank you so much for this opportunity and willingness to share your knowledge.

Everyone at the shop were excellent teachers and gracious hosts. I'm looking forward to putting what I learned into good use.

X2, Thank you so much for putting this on.

[Tim Brown]

This was a first class event. I could tell right away that the guys had done a lot of planning and preparation to get this shop turned into a classroom. I’m very pleased with the knowledge shared, attention to details, and new flathead friends met. First class operation there at Vanpelts! Thanks again.

[zoegrant]

Does Mac have a tranny school ?

[zoegrant]

I just now saw that Mac had a tranny class. I should have asked not if, but when will be the next one ?

[cjshaker]

Originally Posted by zoegrant

I just now saw that Mac had a tranny class. I should have asked not if, but when will be the next one ?

He said he'd have to wait and see if he'll feel like putting on another one. If he does, I would highly suggest making the effort.



Another praise from me for the class. Mac, Will and George were absolutely great. Will had lots of experience to share with assembly and things to look out for. George, well, not only did he have lots of experience to share and help to give with questions, but he is just an awesome individual who I could talk to all day. Vietnam vet (flew helicopters), over 20,000 flight hours (retired airline pilot), multiple restored cars that he did himself, and just an all around great guy.


Thanks, Mac, for everything. It was a great time, and a lot of knowledge gained in the process.


People can post all the pictures they want of the transmissions and parts, but no rear ends (inside joke for those who were there).

[BUBBAS IGNITION]

Mac , good job i understand the time and effort it takes to do these sessions . Keep it up and let me sponsor "lunch" at the next one just send me a note what the cost is and i will pay pal ya some cash !!!!! My email is [email protected] and you can leave me a note on facebook as well.....................

[Craig CT]

Originally Posted by BUBBAS IGNITION

Mac , good job i understand the time and effort it takes to do these sessions . Keep it up and let me sponsor "lunch" at the next one just send me a note what the cost is and i will pay pal ya some cash !!!!! My email is [email protected] and you can leave me a note on facebook as well.....................

Hi Jim; It's great to see you post. God bless you, Craig.

[cas3]

X2, best wishes Bubba, always good to hear from you!

[flatford8]

X3......glad your keeping an eye on us!!.......Mark