1928 radiator shroud

[ora masters]

when was rad shroud used

[Glenn C.]

1928 into 29. Two styles, one with a channel at the bottom to hold the headlight wiring, the other with hook tabs to hold the wiring.

[Clem Clement]

funny thing about Henry. The should also was used on the 39 dump truck.
Clem

[Hoogah]

Originally Posted by Glenn C.

1928 into 29. Two styles, one with a channel at the bottom to hold the headlight wiring, the other with hook tabs to hold the wiring.

Resurrecting an old thread to ask if anyone might care to post a photo showing how the headlight wiring is held in place in the channel at the bottom of this shroud (or even a description would help). I can't see anything on mine that will keep the wiring in the channel, apart from gravity!!

[Mike V. Florida]

Originally Posted by Hoogah

Resurrecting an old thread to ask if anyone might care to post a photo showing how the headlight wiring is held in place in the channel at the bottom of this shroud (or even a description would help). I can't see anything on mine that will keep the wiring in the channel, apart from gravity!!

Gravity will do it.

[Tom Wesenberg]

Sponsored Links (Register now to hide all advertisements)

Gravity and I usually see a small pinch of the trough at each end. Also start by making sure the wire is layed out straight before laying it in the trough.