|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-25-2011, 09:23 AM | #1 |
Senior Member
Join Date: May 2010
Posts: 264
|
Rear motor mount rubber pads and bolts
Need to replace my rear motor mount rubbers . Who sells the best ones.
I hear some are too thick. Thanks in advance! |
07-25-2011, 09:43 AM | #2 |
Senior Member
Join Date: May 2010
Location: South East NJ
Posts: 3,398
|
Re: Rear motor mount rubber pads and bolts
Brattons sells pads that measure almost the same as originals. I remember measuring them and they were just slightly thicker, not enough to worry about. I forget the exact number. Very nicely made product.
The bolt kit Bratton's sells works, but the nuts are not correct- if that matters to you. Some of the earlier kits the bolts were too long from the cotter hole to the base of the head and the nuts were much thinner. |
Sponsored Links (Register now to hide all advertisements) |
|
07-25-2011, 09:59 AM | #3 |
Senior Member
Join Date: May 2010
Location: Toronto, Ontario, Canada
Posts: 1,289
|
Re: Rear motor mount rubber pads and bolts
Keven is right, they are a great fit. My 7 year old grandson had his side done before I finished my side. He loves putting the cotter pins in. He also helped when it came time for the hood latches, just put him on the creeper and rolled him under the car! A great time saver, didn't have to jack the car up at all. He came out with a big smile on his face. Sometimes, little kids are handy to have around.......
|
07-25-2011, 10:15 AM | #4 |
Senior Member
Join Date: May 2010
Posts: 264
|
Thanks Guys
I'll call them and order them this morning
|
07-25-2011, 07:55 PM | #5 |
Senior Member
Join Date: May 2010
Location: Camino, CA.
Posts: 3,086
|
Re: Rear motor mount rubber pads and bolts
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|