|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
09-26-2017, 12:35 PM | #1 |
Senior Member
Join Date: May 2014
Location: North Versailles, PA
Posts: 146
|
rear window removal on Tudor
Hi Gents,
I have read the previous threads I could find here for removal and install. I am at a lost as to how to get that glass out of the body. The side channels are removed and the glass is loose in the remaining side area, but going up doesn't help and going down doesn't seem to allow that glass to get out of the body. I read two threads that explain that it comes out at the bottom. Is that so? I can break it further to get it out but I would like to see how it should come out to reverse the process of getting it in. Any help is appreciated. Again, does the glass come out at the top or at the bottom? Thanks for a respectful reply. Jack |
09-26-2017, 01:48 PM | #2 |
Senior Member
Join Date: May 2014
Location: North Versailles, PA
Posts: 146
|
Re: rear window removal on Tudor
OK, I figured it out. The top garnish trim comes off and out comes the window. I figured they did it simply at the factory.
But two more questions: should the side felt channels be glued in? Mine were but I think they are only to be pressure fit into the body. Second, is the bottom metal channel attached to the window with glue? If so, what type? Thanks |
Sponsored Links (Register now to hide all advertisements) |
|
09-26-2017, 03:54 PM | #3 |
Senior Member
Join Date: Jun 2014
Location: Land of Lincoln
Posts: 3,131
|
Re: rear window removal on Tudor
Sponsored Links (Register now to hide all advertisements)
__________________
Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done |
|
|
Sponsored Links (Register now to hide all advertisements) |
|