|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-06-2020, 03:20 PM | #1 |
Senior Member
Join Date: Dec 2012
Location: Albany New York
Posts: 505
|
1932 Throttle pedal to bellcrank length
What is the correct rod length from the pedal to the bellcrank on a 32 V/8?
|
04-06-2020, 04:25 PM | #2 |
Senior Member
Join Date: May 2010
Location: Petaluma, cal.
Posts: 132
|
Re: 1932 Throttle pedal to bellcrank length
I measured mine at 9 3/4 inches from center of the pivot balls at each end
|
Sponsored Links (Register now to hide all advertisements) |
|
04-06-2020, 04:59 PM | #3 |
Senior Member
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
|
Re: 1932 Throttle pedal to bellcrank length
They measure around 9.7" not installed and 10" installed (measured at the ball opening)
Like stated in the post above |
04-07-2020, 07:42 AM | #4 |
Senior Member
Join Date: Dec 2012
Location: Albany New York
Posts: 505
|
Re: 1932 Throttle pedal to bellcrank length
Got it. Thank You!
|
04-08-2020, 01:20 PM | #5 |
Senior Member
Join Date: May 2010
Location: Marietta, GA
Posts: 1,108
|
Re: 1932 Throttle pedal to bellcrank length
Sponsored Links (Register now to hide all advertisements)
__________________
1940 Mercury Looking for DENVER heads - 81AS - 99AS - 19AS |
|
|
Sponsored Links (Register now to hide all advertisements) |
|