The Ford Barn

fordcarbuff · 08-10-2010, 08:41 PM

My engine was starting to thump alittle, rear babbit is broken, will cut in inserts but the crank has been cut down too much for inserts. If you have one with maybe just one cutting on it, let me know and how much. The block and all other parts are in great shape. Thanks very much!

hardtimes · 08-10-2010, 09:55 PM

fordcarbuff,
'30/31..I assume that you have an A block..no?
Well, I have an early B crank that can be used(cut down) for an A block use. It is very presentable/useable non counterbalanced B crank. Trouble is...shipping to east coast from west coast!! Rick

fordcarbuff · 08-11-2010, 06:43 PM

Hello Hardtimes, Great handle, Rick, I like that one. Please, lets wait this out some because of the shipping costs. Surely someone here on the east coast, near NC has a left-over crank. I have belonged to MARC, MAFCA, and AACA for some time and I am positive that once word gets out, my phone will ring. I am just hoping FORDBARN will make it faster because alot of them are on it. Thanks much for your response! Mike

P.S. Oh yes it is an A block

Chuck Kuntz · 08-12-2010, 07:00 AM

I have one that should clean up at .020 for $35.
Chuck

hardtimes · 08-12-2010, 02:03 PM

Mike,
OK! Thanks, Rick

fordcarbuff · 08-12-2010, 08:43 PM

Sponsored Links (Register now to hide all advertisements)

Hello to you Chuck Kuntz, junior member. Nice to meet another junior member. I am very interested in the crank you presently own. Where do you call home? Thirty-five is a reasonable price to pay and save an eighty year old engine to use again. My phone number is 336-352-4928, and leave me a message with your number, etc.,
Fridays are long days for me at work. If I am late I will call on Saturday in the morning at whatever time you request. Thanks very much. Mike

fordcarbuff · 08-18-2010, 06:35 PM

Thanks to all, I am purchasing a crankshaft(STD) from West Virgina. I just have to go get it.

08-10-2010, 08:41 PM	#1
fordcarbuff Junior Member Join Date: Aug 2010 Location: mount airy, nc Posts: 5	need 30-31 crankshaft with some meat on it City: mount airy State: nc My engine was starting to thump alittle, rear babbit is broken, will cut in inserts but the crank has been cut down too much for inserts. If you have one with maybe just one cutting on it, let me know and how much. The block and all other parts are in great shape. Thanks very much!

08-10-2010, 09:55 PM	#2
hardtimes Senior Member Join Date: May 2010 Location: South California Posts: 6,188	Re: need 30-31 crankshaft with some meat on it fordcarbuff, '30/31..I assume that you have an A block..no? Well, I have an early B crank that can be used(cut down) for an A block use. It is very presentable/useable non counterbalanced B crank. Trouble is...shipping to east coast from west coast!! Rick

08-11-2010, 06:43 PM	#3
fordcarbuff Junior Member Join Date: Aug 2010 Location: mount airy, nc Posts: 5	Re: need 30-31 crankshaft with some meat on it Hello Hardtimes, Great handle, Rick, I like that one. Please, lets wait this out some because of the shipping costs. Surely someone here on the east coast, near NC has a left-over crank. I have belonged to MARC, MAFCA, and AACA for some time and I am positive that once word gets out, my phone will ring. I am just hoping FORDBARN will make it faster because alot of them are on it. Thanks much for your response! Mike P.S. Oh yes it is an A block Last edited by fordcarbuff; 08-11-2010 at 06:48 PM. Reason: spacing

08-12-2010, 07:00 AM	#4
Chuck Kuntz Senior Member Join Date: May 2010 Posts: 13,712	Re: need 30-31 crankshaft with some meat on it I have one that should clean up at .020 for $35. Chuck

08-12-2010, 02:03 PM	#5
hardtimes Senior Member Join Date: May 2010 Location: South California Posts: 6,188	Re: need 30-31 crankshaft with some meat on it Mike, OK! Thanks, Rick

08-12-2010, 08:43 PM	#6
fordcarbuff Junior Member Join Date: Aug 2010 Location: mount airy, nc Posts: 5	Re: need 30-31 crankshaft with some meat on it Sponsored Links (Register now to hide all advertisements) Hello to you Chuck Kuntz, junior member. Nice to meet another junior member. I am very interested in the crank you presently own. Where do you call home? Thirty-five is a reasonable price to pay and save an eighty year old engine to use again. My phone number is 336-352-4928, and leave me a message with your number, etc., Fridays are long days for me at work. If I am late I will call on Saturday in the morning at whatever time you request. Thanks very much. Mike

08-18-2010, 06:35 PM	#7
fordcarbuff Junior Member Join Date: Aug 2010 Location: mount airy, nc Posts: 5	Re: need 30-31 crankshaft with some meat on it Thanks to all, I am purchasing a crankshaft(STD) from West Virgina. I just have to go get it.