|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-09-2019, 02:12 AM | #1 |
Senior Member
Join Date: May 2017
Location: Arkansas
Posts: 611
|
8BA Basic Cam Issues That're Over My Head
On my first flathead engine my machine shop guy, who I like and trust, got me a rebuild kit. It all seemed like pretty good stuff except the lifters, (the often discussed hollow adjustable offshore items), they seemed kinda cheap. Also included was an Isky Max One cam. That engine is a year or more done, runs great, only has about 70 miles on it. And not much idling time.
Now I've pulled that engine from my car, it's going in a pickup. I've freshened up a 53 Mercury engine and put it in the car. Looking ahead to engine #3, I decided to pull out that Max One cam and save it. This one in question is going to get some 8RT heads I collected........and also I've collected a really nice looking OEM used cam. I measured the journal parts of both cams, right on so in the used one went. Now is where ignorance comes into play: I can't get enough clearance on the intake valves, adjuster won't screw down enough. These are those cheap hollow adjustables. I even put one in the vise and it seems like it'll break if I try any more. I have some of the solid adjustables here, tried a couple of them- they would work alright. But I'd like some idea of what the hell is going on. I would have thought that, logically, I'd have been adjusting things the other way. I know this is wordy and not very clear, but I'm really curious. Why the trouble getting enough clearance? Any ideas, Thanks! |
08-09-2019, 03:50 AM | #2 |
Senior Member
Join Date: May 2010
Location: Charlotte NC KiWi-L100 available here
Posts: 2,963
|
Re: 8BA Basic Cam Issues That're Over My Head
Chevy valves?
|
Sponsored Links (Register now to hide all advertisements) |
|
08-09-2019, 04:18 AM | #3 |
Senior Member
Join Date: Jan 2011
Posts: 162
|
Re: 8BA Basic Cam Issues That're Over My Head
X2 Chevy valves and stock basic circle cam does that...
|
08-09-2019, 05:57 AM | #4 |
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
Re: 8BA Basic Cam Issues That're Over My Head
There are also lifters available with thinner adjusting screw heads to address the longer valve issues.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES |
08-09-2019, 07:26 AM | #5 | |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 1,052
|
Re: 8BA Basic Cam Issues That're Over My Head
Quote:
Your issue does appear to be the valves are too long, for years we've recommended NOT to use the Chevy valves, they create more of a problem than they're worth. Like your situation now and also getting the desired installed spring hgts correct, it really becomes a headache when doing the final ass'y. We have never come across any situation where there was a "need" for any longer valves than the OEM lengths, regardless of whether or not the cam base-circle has been reduced. If the adjusters are too "short" (due to the base-circle) simply use some (.060" thick) lash caps, we've been doing this for years now when some extra length is needed, which is rarely. (Add) Over the last 40/45 years or so we've done a few units where the customer requested slightly larger (not longer) o'size valves, in this case we used the Ford 240"/300" 6 cylinder exhaust valves. Thanks, Gary in N.Y. P.S. The adjusting nut thickness on the Johnson's we use measures .125" thick. If it'll help, to use your lifters now you might be able to "shorten" the nut heights a bit, would only need a decent valve grinder capable of grinding the valve stem ends?
__________________
http://www.stromberg-bulletin.com/me...berg-equipped/ Last edited by GOSFAST; 08-09-2019 at 07:53 AM. Reason: Add photo |
|
08-09-2019, 08:49 AM | #6 |
Senior Member
Join Date: May 2010
Location: Chester Vt
Posts: 8,860
|
Re: 8BA Basic Cam Issues That're Over My Head
Sponsored Links (Register now to hide all advertisements)
|
08-09-2019, 09:42 AM | #7 |
Senior Member
Join Date: Oct 2015
Location: Bonita, CA
Posts: 1,374
|
Re: 8BA Basic Cam Issues That're Over My Head
|
08-09-2019, 12:39 PM | #8 |
Senior Member
Join Date: May 2017
Location: Arkansas
Posts: 611
|
Re: 8BA Basic Cam Issues That're Over My Head
Thanks a lot guys. Ron: I have these nice 8RT heads and am using them since the engine is going in a truck. Using them is one of the reasons I decided to pull this Max One out and save it for the next engine.
I never thought about chevy valves. I think these said Sealed Power, maybe from Mac's. So it would be just a matter of that particular dimension on that Max One cam will accomodate the chevy valves, but the OEM cam won't? At least with these lifters? And I guess that kit included those valves cause they knew they would work with the Max One. I'm a long time motorhead, but I sure don't know much about cams. I think I'll set these hollow adjustables aside and use the new solid ones I've picked up. It does look like the bolt head is pretty thick, didn't think to measure that. |
08-09-2019, 12:51 PM | #9 |
Senior Member
Join Date: May 2017
Location: Arkansas
Posts: 611
|
Re: 8BA Basic Cam Issues That're Over My Head
That little rig Gary shows looks like it would be a little more precise than my big file!
|
08-09-2019, 03:03 PM | #10 |
Senior Member
Join Date: May 2010
Location: Chester Vt
Posts: 8,860
|
Re: 8BA Basic Cam Issues That're Over My Head
The chevy valves can only be used with a cam with a small base circle like the L-100 which was very popular a few years ago, because it sounded like a rall hot engine. They worked pretty good when set up right. Back to the 8RT heads. I would suggest that you have them milled for .045" piston to head clearance. This simple modification will improve drivability and fuel mileage. Good luck
|
08-09-2019, 03:18 PM | #11 |
Senior Member
Join Date: May 2017
Location: Arkansas
Posts: 611
|
Re: 8BA Basic Cam Issues That're Over My Head
Thanks. I read this stuff every day, so I'm keeping up.
|
08-09-2019, 03:40 PM | #12 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 8BA Basic Cam Issues That're Over My Head
The reason for the issue with the lifters when going from a high lift cam to a stock cam is the change in the base circle diameter. The stock cam has a larger diameter base circle which decreases the distance to the valve. Think you would have been a lot better off leaving the Max-1 cam in there.
|
08-09-2019, 07:08 PM | #13 |
Senior Member
Join Date: May 2017
Location: Arkansas
Posts: 611
|
Re: 8BA Basic Cam Issues That're Over My Head
I'm sure I would have, but I want it for engine #3. And also, I'm an experimentalist on this stuff. I like to put stuff together and see how it works. "Do it once, do it right" often doesn't apply here. I AM in Arkansas. Like I said, I read this everyday and I value the posts by every one of you guys.
This particular issue is resolved by putting in one of my sets of new solid adjustable lifters. I was wanting to hoard them, but I got some more. Most interesting to me, I wouldn't even know about the chevy valve deal, and the base circle etc., without those cheap lifters. |
08-10-2019, 12:28 AM | #14 |
Senior Member
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,779
|
Re: 8BA Basic Cam Issues That're Over My Head
|
08-10-2019, 06:22 AM | #15 |
Senior Member
Join Date: Aug 2017
Location: ohio
Posts: 986
|
Re: 8BA Basic Cam Issues That're Over My Head
Leon bee, before i had my engine rebuilt it had an 8cm cam & 8rt heads. Don't know if those heads were milled or not, but it ran REAL GOOD. It was just worn out & using oil.
I put Offy heads on the rebuild, but wonder how it would have run with the 8rt's . Just my 2 cents, or maybe non sense....???? m |
08-10-2019, 08:16 AM | #16 | |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 8BA Basic Cam Issues That're Over My Head
Quote:
|
|
08-11-2019, 07:03 PM | #17 | |
Senior Member
Join Date: May 2010
Location: Charlotte NC KiWi-L100 available here
Posts: 2,963
|
Re: 8BA Basic Cam Issues That're Over My Head
Quote:
Cheers Tony Last edited by KiWinUS; 08-11-2019 at 08:01 PM. |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|