|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-29-2018, 06:01 PM | #1 |
Junior Member
Join Date: Oct 2018
Posts: 5
|
302 into 55 Merc headers
What headers work best with a 302 into a 1955 Merc? I have a AOD trans if that makes a difference. Thanks, Mike
|
10-29-2018, 06:52 PM | #2 |
Junior Member
Join Date: Jan 2015
Posts: 26
|
Re: 302 into 55 Merc headers
I used Sanderson hugger headers for my '56 ranch wagon with a 302 & 5 speed tremec transmission.
|
Sponsored Links (Register now to hide all advertisements) |
|
10-29-2018, 08:46 PM | #3 |
BANNED
Join Date: Jun 2010
Location: Utica, Ohio
Posts: 522
|
Re: 302 into 55 Merc headers
I would look at a set for fox body Mustang. They exit at the rear like the Merc.
|
10-30-2018, 02:13 AM | #4 |
Senior Member
Join Date: May 2010
Location: Phoenix,AZ
Posts: 1,417
|
Re: 302 into 55 Merc headers
A lot of guys over at the H.A.M.B. 1952-59 Ford Group (including me) use the Hedman 88400's also these https://www.summitracing.com/parts/p.../model/patriot Also available are these: https://www.summitracing.com/parts/p.../model/patriot Good clearance at the steering box (I have an AOD also) Collectors are a nice straight shot to the cross member ports too.
Last edited by JeffB2; 10-30-2018 at 02:20 AM. |
10-30-2018, 04:13 AM | #5 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,484
|
Re: 302 into 55 Merc headers
Are these log style or individual tubes? I can't make them out.
__________________
***** - MULTI-VEHICLE SYNTHETIC TRANSMISSION FLUID - Multi-vehicle transmission fluids are becoming more and more popular in the marketplace. Oil marketers design these fluids for a wide range of automatic transmission types. While they are not licensed by any specific auto manufacturer ... ??? ... enough said ... DIAGNOSED CDO - (OCD In Correct Alphabetical Order)
|
10-30-2018, 10:33 AM | #6 |
Senior Member
Join Date: Jun 2010
Location: Detroit suburb, MI
Posts: 3,706
|
Re: 302 into 55 Merc headers
Sponsored Links (Register now to hide all advertisements)
Sal |
10-30-2018, 04:33 PM | #7 |
BANNED
Join Date: Jun 2010
Location: Utica, Ohio
Posts: 522
|
Re: 302 into 55 Merc headers
Another option might be '65 Mustang tri-y headers. I've used them on 302 in Ranger conversions. All I had to do was cut a small pie shape on the passenger collector and move collector outward about 10 degrees. Fit so well that they could be installed from above with engine installed. And they are cheap.
|
10-30-2018, 06:15 PM | #8 |
Senior Member
Join Date: May 2010
Location: Phoenix,AZ
Posts: 1,417
|
Re: 302 into 55 Merc headers
Picture and specs here:https://www.jegs.com/i/Hedman/500/88...caAomKEALw_wcB These are actually listed for 1965-69 Mustangs.
|
10-31-2018, 03:19 AM | #9 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,484
|
Re: 302 into 55 Merc headers
Quote:
Can you give the URL for that site. I can't find it.
__________________
***** - MULTI-VEHICLE SYNTHETIC TRANSMISSION FLUID - Multi-vehicle transmission fluids are becoming more and more popular in the marketplace. Oil marketers design these fluids for a wide range of automatic transmission types. While they are not licensed by any specific auto manufacturer ... ??? ... enough said ... DIAGNOSED CDO - (OCD In Correct Alphabetical Order)
|
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|