03-08-2018, 12:46 PM | #1 |
Junior Member
Join Date: Jun 2011
Posts: 21
|
AR Fenders
I just picked up a rear fender for my 29 sedan, an AR 28, seems to be shaped different at the rear of the fender. My other fenders are more shovel shaped and this one seems to be more round. Is there differences between the AR front fenders and later 28/29 fenders also?
|
03-08-2018, 12:57 PM | #2 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 5,963
|
Re: AR Fenders
You are correct.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-08-2018, 01:06 PM | #3 |
Junior Member
Join Date: Jun 2011
Posts: 21
|
Re: AR Fenders
Thanks for the reply, can you give me a hint what the front differences would be
|
03-08-2018, 01:53 PM | #4 | |
Senior Member
Join Date: May 2010
Location: Boulder, CO
Posts: 559
|
Re: AR Fenders
Quote:
Your are most likely wanting to know what the different designs were for 1927 through 1929 front fenders. The major change was the frame flange (design 1 had a 7" frame flange, design 2 had a 5-3/4" frame flange, and design 3 had a 3-1/8" frame flange). Your can read/see the design differences at http://aafords.com/aa-chassis/aa-16000-fenders/#fffsb. This site is for the AA Fords. But, the front fenders used on the AA's were A chassis fenders for 1927-1929.
__________________
[email protected] - email contact https://aafords.com Ford Model AA Truck Club @ aafords.com |
|
03-08-2018, 10:37 PM | #5 |
Junior Member
Join Date: Jun 2011
Posts: 21
|
Re: AR Fenders
Thanks Neil, that answered my concerns. I have two sets of fronts and would of course want them to match. Am i correct about the earlier rear fender having a different shape on the bell or rear of the fender?
|
03-08-2018, 11:59 PM | #6 |
Senior Member
|
Re: AR Fenders
Sponsored Links (Register now to hide all advertisements)
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
03-09-2018, 09:10 AM | #7 |
Senior Member
Join Date: May 2010
Location: Boulder, CO
Posts: 559
|
Re: AR Fenders
I am an AA guy - but page 13-8 of the RGJS shows the "beaver tail rear fender" plus other differences (used through March 1928). Also, page 13-6 shows the 5-3/4" #2 front fender.
__________________
[email protected] - email contact https://aafords.com Ford Model AA Truck Club @ aafords.com |
03-09-2018, 09:59 AM | #8 |
Senior Member
Join Date: Jun 2014
Location: Rocklin, CA
Posts: 779
|
Re: AR Fenders
the running board aprons are also different.
|
03-10-2018, 07:49 PM | #9 |
Junior Member
Join Date: Jun 2011
Posts: 21
|
Re: AR Fenders
Just a quick reply to say thanks to you fellas for the information, back to fixing the two old fenders, any one need a cherry early rear sedan fender?
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|