|
11-14-2020, 09:55 AM | #1 |
Senior Member
Join Date: Sep 2016
Posts: 274
|
4 post lifts
Anyone have experience with 4 post lifts? I was considering 2 different ones. One made by forward/direct lift or bendpak. The bend pack set up is going to run about 1500-1800 more then the forward.
Really just wondering if the name brand is worth the extra money or if direct lift is a good one? Last edited by 1stford; 11-14-2020 at 10:05 AM. |
11-14-2020, 10:02 AM | #2 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: 4 post lifts
I have a 4-post and love it. But, I have had it for many years and the company is no longer around.
|
Sponsored Links (Register now to hide all advertisements) |
|
11-14-2020, 10:13 AM | #3 |
Senior Member
Join Date: May 2010
Location: Wilmington, OH/Lakeland, FL
Posts: 952
|
Re: 4 post lifts
I have had a Backyard Buddy lift for many years with no problems. Perhaps the safest 4-post lift on the market. They are a bit pricey. I believe I paid around $3,200 fifteen years ago. Purchased the taller one to give me more head room. They are made in Ohio with USA or Canadian steel...no Chinese stuff!
Here is their link: www.advantagelifts.com Good Luck and Stay Safe! Pat |
11-14-2020, 10:38 AM | #4 |
Senior Member
Join Date: Jun 2014
Location: New Jersey
Posts: 1,772
|
Re: 4 post lifts
I have an Atlas 8k extended height lift. I’ve had it about 4-5 years. It was professionally installed and have had no issues.
__________________
Thanks Andy 1952 F1 |
11-14-2020, 10:56 AM | #5 |
Senior Member
Join Date: May 2010
Location: Kaufman, TX
Posts: 822
|
Re: 4 post lifts
I have both 4 post and two post lifts. The four post is good if you don’t need access to remove wheels. Currently use the 4 post for storing a car in the air to gain floor space, the 2 post is what I use the most. Oil changes, brake jobs, etc.
If I had to choose one it would be the 2 post.
__________________
Marvin Fagan 214-697-8430 |
11-14-2020, 11:34 AM | #6 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,110
|
Re: 4 post lifts
Sponsored Links (Register now to hide all advertisements)
|
11-14-2020, 11:41 AM | #7 |
Senior Member
Join Date: Sep 2016
Posts: 274
|
Re: 4 post lifts
I currently have a 2 post. I’m looking to create space.
|
11-14-2020, 12:35 PM | #8 |
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,639
|
Re: 4 post lifts
I have an Atlas two post in one building and have plans to buy a four post to put in another building for storage. I’ve had no issues with the two post at all...... Mark
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
11-14-2020, 12:59 PM | #9 |
Senior Member
Join Date: Sep 2013
Location: SoCal-Redlands
Posts: 3,039
|
Re: 4 post lifts
For what its worth, most of the shops in town use Bend Pak lifts. Both 2 and 4 post.
__________________
Making the simple complicated for over 30 years. |
11-14-2020, 01:28 PM | #10 |
Senior Member
Join Date: Sep 2014
Location: Wiscasset, Maine
Posts: 2,018
|
Re: 4 post lifts
I have a BendPak 4-post and like it. I wired it 220V.
|
11-14-2020, 01:31 PM | #11 |
Senior Member
Join Date: Jun 2013
Location: Reno Nevada
Posts: 391
|
Re: 4 post lifts
I have to agree with Pat/Ohio I have had a Backyard Buddy lift for many years with no problems. Perhaps the safest 4-post lift on the market. They are a bit pricey. I believe I paid around $3,200 fifteen years ago. Purchased the taller one to give me more head room. They are made in Ohio with USA or Canadian steel...no Chinese stuff!
Here is their link: www.advantagelifts.com I have looked at them all and am staying away from the Chineese / off shore ones. Looking at the steel that the off shore / Chineese use is a bit thinner and are made of sheet stock bent then welded not like the ones made in the US that use extruded thicker material. I am looking at buying at least 4ea lifts and would not even consider anything but US made. Keep my money here in America. vic |
11-14-2020, 02:39 PM | #12 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,368
|
Re: 4 post lifts
I am planning on buying and installing a 4-post lift next spring. I am more inclined to buy on price. I have to believe that any lift sold by a reputable distributor in the United States has to meet certain minimum safety standards. It seems the minimum capacity lift generally available is 8000 lbs. Since the lift I install will have minimal use and be called upon to be used with cars of less than half that weight, I should be on solid ground. I don't have a 3/4 ton 4 wheel drive truck, a large SUV or anything similar and will not use it for anything approaching commercial use. I am not automatically scared off by the "C" word either.
|
11-14-2020, 05:23 PM | #13 | |
Senior Member
Join Date: May 2010
Location: Minnesota
Posts: 1,834
|
Re: 4 post lifts
Quote:
|
|
11-14-2020, 02:54 PM | #14 |
Senior Member
Join Date: Jun 2014
Location: New Jersey
Posts: 1,772
|
Re: 4 post lifts
I replaced the front axle on my F1 using the Atlas 4 post lift. You can do almost anything a 2 post can do. A 4 post is not just a storage lift.
I do agree a 2 post makes it easier (for some jobs) however, I also like the advantage of the ability to store a car under option.
__________________
Thanks Andy 1952 F1 |
11-14-2020, 04:23 PM | #15 |
Senior Member
Join Date: May 2010
Posts: 4,516
|
Re: 4 post lifts
I have a BendPak 7000lb tall 4 post. Mines wired for 110 and works fine. I needed it for shop work but most of the time my 32 Ford pickup is stored on top. I have a 12ft 6inch ceiling so I can walk underneath with no problems. Also I bolted mine to the floor for more stability. I looked for quite a while before purchasing and thought BendPak looked like the best choice for me. I bought it from a company in Omaha who brought it down (125 miles) and installed it in a short day.
|
11-14-2020, 05:42 PM | #16 |
Member
Join Date: May 2010
Location: DeWitt, IL
Posts: 53
|
Re: 4 post lifts
I have a Bend-Pak scissors lift , my latest one. Very disappointed it was made in China. The instructions were a jumble of English and misleading. It called for a 1 1/4 masonry bit which was expensive and only required a 1" which I already had. A big hammer and a lot of grinding to assemble. The console was so bad I finally drilled new holes and used the big hammer to make the cover fit. Way overpriced at $5000. I got little help as I am not versed in broken Chinese/English.
|
11-14-2020, 05:48 PM | #17 |
Member
Join Date: May 2010
Location: DeWitt, IL
Posts: 53
|
Re: 4 post lifts
I also have 2 4-post lifts and a 2 post. I use the 4 posts mostly to store 2 cars. The 2 post does it all including storing one in the air.
|
11-14-2020, 06:11 PM | #18 |
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,639
|
Re: 4 post lifts
1stford.....there are a lot of YouTube videos and reviews online of many lifts. I would suggest spending a rainy afternoon researching..... you’ll find one that your comfortable with the price, quality and function.....that’s what I did before purchasing mine.....
Good Luck with your search......Mark
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
11-14-2020, 06:29 PM | #19 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,766
|
Re: 4 post lifts
One of the youtube channels I follow is Mustie1. he bought a Wildfire 4 poster. He bought it after seeing one on another youtube channel Vice grip garage. just mentioning as he (Mustie 1) seems very pleased with it.
https://youtu.be/jhwB237I360 No affiliation, just posting in case it proves useful. Mart. |
11-16-2020, 01:41 AM | #20 | |
Senior Member
Join Date: May 2010
Location: Lower Hutt , New Zealand
Posts: 2,127
|
Re: 4 post lifts
Quote:
GB
__________________
"you can't make honey out of dog sh*t" "You're a long time looking at the lid" |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|