|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-12-2010, 12:45 PM | #1 |
Member
Join Date: Jul 2010
Location: Aurora, IL
Posts: 79
|
1930 front bumper arms w/square cut ends
City:
Aurora
State:
IL
Looking for a nice set of 1930 left and right front bumper arms. Thanks
|
08-13-2010, 07:33 AM | #2 |
Senior Member
Join Date: Jun 2010
Posts: 416
|
Re: 1930 front bumper arms w/square cut ends
How do they look and a picture would be a great help.
__________________
Wanted flathead speed equipment Thanks |
Sponsored Links (Register now to hide all advertisements) |
|
08-13-2010, 12:19 PM | #3 |
Member
Join Date: Jul 2010
Location: Aurora, IL
Posts: 79
|
Re: 1930 front bumper arms w/square cut ends
Attached is a picture of 1929 bumper arms. I need the 1930 arms which look very similar. The 1930 arms measure approximately 16" from end to end on the diagonal. The 29 arms are longer and measure 19" on the diagonal.
Thanks |
08-17-2010, 09:14 AM | #4 |
Member
Join Date: May 2010
Location: Tama, Iowa
Posts: 68
|
Re: 1930 front bumper arms w/square cut ends
Sorry about posting in the add but its just for pics, all other correspondence will be thru PM's.
Here's what I've got: The Diagonal was between 17" and 18" They are 16" long from the flat of the bumper attach point to the end of the frame mount. PM me with any other questions. Jeff Last edited by hotrodjeep; 08-18-2010 at 09:10 AM. |
08-18-2010, 08:42 PM | #5 |
Member
Join Date: Jul 2010
Location: Aurora, IL
Posts: 79
|
Re: 1930 front bumper arms w/square cut ends
Jeff
Thanks for taking the pictures and posting the description. I don't believe these arms are correct for my 30 station wagon. I have measured several sets of 30 bumper arms. They all measured 16" on the diagonal. Thanks Tim |
08-19-2010, 09:27 AM | #6 |
Senior Member
Join Date: Jun 2010
Posts: 416
|
Re: 1930 front bumper arms w/square cut ends
Sponsored Links (Register now to hide all advertisements)
I will send a picture when I find out were it has gone?? Thanks
__________________
Wanted flathead speed equipment Thanks |
08-27-2010, 09:40 AM | #7 |
Senior Member
Join Date: Jun 2010
Posts: 416
|
Re: 1930 front bumper arms w/square cut ends
Is this what your looking for?
__________________
Wanted flathead speed equipment Thanks |
08-27-2010, 10:26 AM | #8 |
Member
Join Date: Jul 2010
Location: Aurora, IL
Posts: 79
|
Re: 1930 front bumper arms w/square cut ends
Yes I think so. can you email me at [email protected] with you phone number?
|
08-29-2010, 06:59 PM | #9 |
Senior Member
Join Date: Jun 2010
Posts: 416
|
Re: 1930 front bumper arms w/square cut ends
Hi, send some info in the morning if that ok? Just got back from holiday
__________________
Wanted flathead speed equipment Thanks |
08-30-2010, 08:26 AM | #10 |
Member
Join Date: Jul 2010
Location: Aurora, IL
Posts: 79
|
Re: 1930 front bumper arms w/square cut ends
Sounds good. Tim
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|