|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-21-2021, 07:43 PM | #1 |
Member
Join Date: Feb 2020
Location: Glendora, Calif..
Posts: 56
|
Water return housing
Putting a new Bergs radiator in and took the inlet housing off to Change the gasket along with new hoses and went to put the housing back on, using the same bolts that came out, and they won’t tighten, nothing seems to be stripped but the threads in the block seem to be worn down/out. Just wondering what’s the best way to solve this problem. Thanks in advance.
Doug |
|
|
Sponsored Links (Register now to hide all advertisements) |
|