49-51 Mercury Steering Gear Box Repair
I am currently performing an overhaul of the steering gearbox on my 51 Mercury and I have questions for those who have done this before. The worm gear in my box is spalled out in the usual place for a high time box (center of worm). The worm gear for the Mercury is not to my knowledge being reproduced at this time. I have heard rumors that the worm gear for the 48-52 F1 type pick ups can be used as a replacement. Has anyone on the Ford Barn board used the P/N 7HC-3524-X replacement worm for a 49-51 Mercury application and if so, what all else has to be utlilized/modified to make it work?
I figure that an F1 roller gear kit would likely have to be used for the sector as well but would like confirmation on this if someone would be so kind.
Kerby
|