|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-15-2021, 04:48 PM | #1 |
Senior Member
Join Date: Jan 2014
Location: Holmen,Wisconsin
Posts: 787
|
Will a Runtz voltage drop work on a clock?
My question is in the title, I'm changing my '51 Tudor to 12v positive ground. Have begun collection the big and small stuff needed, and am wondering if the same Runtz volt drop devices that work well on the gauges, work on the clock?
__________________
I went, I saw, I bought the T shirt 51 Ford Deluxe Tudor 32 Ford roadster 39 Mercury Towncar |
12-15-2021, 11:21 PM | #2 |
Member
Join Date: Oct 2013
Location: Fairbanks, Alaska
Posts: 92
|
Re: Will a Runtz voltage drop work on a clock?
Is it an original style clock?
I don’t have first hand experience but from what I understand the power to the clock just goes to turn the clock spring. It may work fine on 12 volts. |
Sponsored Links (Register now to hide all advertisements) |
|
12-16-2021, 12:54 AM | #3 |
Senior Member
Join Date: May 2010
Location: Melbourne Australia.
Posts: 2,079
|
Re: Will a Runtz voltage drop work on a clock?
The Runtz voltage drop unit will not be able to supply enough current (amps) to wind the clock spring reliably. Buy a cheap China made voltage drop unit on ebay which will supply 2 or 3 amps to do the job better. Dont run your 6 volt clock on 12 volts because the coil winding contacts wont last long with twice the current flowing through them. Regards, Kevin.
|
12-16-2021, 03:06 AM | #4 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,308
|
Re: Will a Runtz voltage drop work on a clock?
Contact Williamson's Instruments in AS. They know.
|
12-16-2021, 08:51 AM | #5 |
Senior Member
Join Date: May 2017
Posts: 566
|
Re: Will a Runtz voltage drop work on a clock?
Don't know how long it would last but what about a small 6 volt battery?
__________________
Steve in Denver |
12-16-2021, 12:18 PM | #6 |
Senior Member
Join Date: Jan 2014
Location: Holmen,Wisconsin
Posts: 787
|
Re: Will a Runtz voltage drop work on a clock?
Sponsored Links (Register now to hide all advertisements)
__________________
I went, I saw, I bought the T shirt 51 Ford Deluxe Tudor 32 Ford roadster 39 Mercury Towncar |
12-16-2021, 12:32 PM | #7 |
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,630
|
Re: Will a Runtz voltage drop work on a clock?
Contact Classic Auto Electric in Kansas. He knows his stuff…. Mark
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
12-16-2021, 12:45 PM | #8 | |
Senior Member
Join Date: Jan 2014
Location: Holmen,Wisconsin
Posts: 787
|
Re: Will a Runtz voltage drop work on a clock?
Quote:
Yes Joe does! He breathed life into my '39 Merc clock.
__________________
I went, I saw, I bought the T shirt 51 Ford Deluxe Tudor 32 Ford roadster 39 Mercury Towncar |
|
12-16-2021, 12:52 PM | #9 |
Senior Member
Join Date: Feb 2020
Posts: 146
|
Re: Will a Runtz voltage drop work on a clock?
Right out of Randy Rundle's (the seller of the RUNTZ) book "The Official 12 Volt Conversion Guide"
|
12-16-2021, 08:32 PM | #10 |
Senior Member
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,982
|
Re: Will a Runtz voltage drop work on a clock?
I had Williamson's convert two clocks to a quartz movement. Great job. The first on was done almost 20 years ago and still works like a charm. It was a 6 volt 54 clock. At the time, he was the least expensive of all I looked at.
__________________
48 Ford Conv 56 Tbird 54 Ford Victoria |
|
|
Sponsored Links (Register now to hide all advertisements) |
|