|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-04-2024, 02:08 PM | #1 |
Member
Join Date: Nov 2021
Location: Central Mass.
Posts: 96
|
36 front fender welting?
I’m reassembling my 36 and looking for confirmation on correct front fender welting. When I disassembled, there were 3 pieces on each side of black welting with a stainless cap that aligns withe the fender joint. There was no welting on the inner rear part of the fender where it bolts to the lower cowl. Should there be some welting at the rear cowl joint?
Thanks! |
02-04-2024, 02:24 PM | #2 |
Senior Member
Join Date: May 2010
Location: Minnesota
Posts: 1,138
|
Re: 36 front fender welting?
From my own experience and reviewing original 36 Fords there is no welting between the fender and the lower cowl. Don Rogers should be able to confirm this.
|
Sponsored Links (Register now to hide all advertisements) |
|
02-04-2024, 04:35 PM | #3 |
Senior Member
Join Date: May 2010
Location: near Pittsburgh, PA
Posts: 403
|
Re: 36 front fender welting?
There is no welting between the front fender and the lower cowl.
|
02-05-2024, 10:34 PM | #4 |
Senior Member
Join Date: Aug 2013
Location: rosemead ca.
Posts: 574
|
Re: 36 front fender welting?
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|