|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-13-2013, 09:52 AM | #1 |
Member
Join Date: Sep 2010
Location: Deerfield, NJ
Posts: 85
|
19" A wheels...
Anybody run stock 19" A wheels at 60 to 70 mph? If so, how are they as far as vibration is concerned with the tire balanced? How true was a new 19" wheel back then? Thanks guys!
__________________
1927 T, 1930 A coupe, 1929 A Roadster, 1933 Dodge pickup, 1935 5 window coupe |
09-13-2013, 10:01 AM | #2 |
Senior Member
Join Date: Dec 2010
Location: SW Fla
Posts: 202
|
Re: 19" A wheels...
I tryed but I must have a governor as mine only goes to 54MPH
|
Sponsored Links (Register now to hide all advertisements) |
|
09-13-2013, 10:04 AM | #3 |
Member
Join Date: Sep 2010
Location: Deerfield, NJ
Posts: 85
|
Re: 19" A wheels...
Lol! This is for a little bit of a hotter model A!
__________________
1927 T, 1930 A coupe, 1929 A Roadster, 1933 Dodge pickup, 1935 5 window coupe |
09-13-2013, 10:09 AM | #4 |
Senior Member
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,115
|
Re: 19" A wheels...
I have 19" wheels on mine, 60-65 is no problem. Haven't ventured much past that. I usually try to stay in the 50-55 range when on the open highway, just for my own piece of mind.
__________________
Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club |
09-13-2013, 10:12 AM | #5 |
Member
Join Date: Sep 2010
Location: Deerfield, NJ
Posts: 85
|
Re: 19" A wheels...
Cool, thanks Carl!
__________________
1927 T, 1930 A coupe, 1929 A Roadster, 1933 Dodge pickup, 1935 5 window coupe |
09-13-2013, 10:34 AM | #6 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: 19" A wheels...
Sponsored Links (Register now to hide all advertisements)
Last edited by Purdy Swoft; 09-13-2013 at 12:10 PM. |
09-13-2013, 10:40 AM | #7 |
Member
Join Date: Sep 2010
Location: Deerfield, NJ
Posts: 85
|
Re: 19" A wheels...
Hey Purdy, this with original wheels? How true did they spin? A lot of wheel weights on them? Thanks!
__________________
1927 T, 1930 A coupe, 1929 A Roadster, 1933 Dodge pickup, 1935 5 window coupe |
09-13-2013, 11:02 AM | #8 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: 19" A wheels...
Yes, I use original model A 19 inch wheels. I only use the truest originals that I can find. I think That 1/8 inch out was considered acceptable for new wheels by Ford in the day. Some are better. Dyna beads that is used inside the tube is said to balance better but I have never tried them
|
09-13-2013, 11:08 AM | #9 |
Senior Member
Join Date: May 2010
Location: Fountain Valley, Calif.
Posts: 937
|
Re: 19" A wheels...
On the freeway I usually keep my 1930 Town Sedan around 60, sometimes up to 65, and it rides and tracks just fine, and the wheels seem to be well balanced and true.
|
09-13-2013, 11:12 AM | #10 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,516
|
Re: 19" A wheels...
As Purdy said, an 1/8" is within spec but most NOS were actually closer to a 1/16th. With a little work, you can easily obtain 1/16th on a good wheel.
|
09-13-2013, 11:19 AM | #11 |
Member
Join Date: Sep 2010
Location: Deerfield, NJ
Posts: 85
|
Re: 19" A wheels...
I've only checked one wheel on a balancer at work. Just want to spin it and look at it just by eye. I'd say more than an 1/8th left to right wobble. How difficult are they to straighten? I assume by way of heat to certain spokes? I've not searched the topic as of yet. Great answers from all you guys, this place is a wealth of knowledge! Thank you!
__________________
1927 T, 1930 A coupe, 1929 A Roadster, 1933 Dodge pickup, 1935 5 window coupe |
09-13-2013, 11:26 AM | #12 |
Member
Join Date: Sep 2010
Location: Deerfield, NJ
Posts: 85
|
Re: 19" A wheels...
Shall I retro fit this here truck?
Just kidding!!!
__________________
1927 T, 1930 A coupe, 1929 A Roadster, 1933 Dodge pickup, 1935 5 window coupe |
09-13-2013, 11:27 AM | #13 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,516
|
Re: 19" A wheels...
Quote:
|
|
09-13-2013, 11:32 AM | #14 |
Member
Join Date: Sep 2010
Location: Deerfield, NJ
Posts: 85
|
Re: 19" A wheels...
Good deal Brent, thanks!
__________________
1927 T, 1930 A coupe, 1929 A Roadster, 1933 Dodge pickup, 1935 5 window coupe |
09-13-2013, 11:40 AM | #15 |
Senior Member
Join Date: May 2010
Location: NC
Posts: 2,975
|
Re: 19" A wheels...
In my 1930 pickup I use to have, had it to 75 with 19 inch wheels. It drove good . But you are not going to go 75 with a stock A.
|
09-13-2013, 11:49 AM | #16 | |
Senior Member
Join Date: May 2010
Location: Reseda, Calif.
Posts: 2,188
|
Re: 19" A wheels...
Quote:
http://www.durableperformance.net/Do...2.4.09.web.pdf |
|
09-13-2013, 12:00 PM | #17 |
Member
Join Date: Sep 2010
Location: Deerfield, NJ
Posts: 85
|
Re: 19" A wheels...
Excellent simple info right there! Great link! Thank you!
__________________
1927 T, 1930 A coupe, 1929 A Roadster, 1933 Dodge pickup, 1935 5 window coupe |
09-13-2013, 12:10 PM | #18 |
Senior Member
Join Date: May 2010
Location: Between Seattle & Tacoma
Posts: 2,354
|
Re: 19" A wheels...
Instead of balancing weights a lot of us in Seattle have been using the ceramic beads inside the tubes. Works great!
|
09-13-2013, 12:12 PM | #19 |
Senior Member
Join Date: May 2010
Location: Between Seattle & Tacoma
Posts: 2,354
|
Re: 19" A wheels...
Look up dyna beads on line. Motorcycle shops use them. Also big trucks and giant turbine wheels
|
09-13-2013, 12:43 PM | #20 |
Senior Member
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,115
|
Re: 19" A wheels...
I ordered what I thought were Dyna Beads from Snyders, but they sent another brand. Haven't used them yet, so can't say if they do the same job as has been reported by others using Dyna Beads.
__________________
Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club |
|
|
Sponsored Links (Register now to hide all advertisements) |
|