The Ford Barn

Fordman487 · 10-31-2016, 02:15 PM

Hello-

I'm looking for help matching this gas cap- it is to a Ford 1935 1 1/2 ton pick-up truck with the tank under the front seat. The tank may not be original as I ordered a 1935 gas cap from MAC's and it was too large to fit on the neck. Can anyone offer advice or help match this so I can buy a new one? As you can see the gasket is shot and the cap leaks.

51 MERC-CT · 10-31-2016, 03:33 PM

Sponsored Links (Register now to hide all advertisements)

Had a similar problem once and cured the problem by cutting a gasket out of a sheet of Neoprene rubber. Cut the OD to fit the inside of the cap with the ID smaller than the center piece. (it will stretch over it )

10-31-2016, 03:33 PM	#2
51 MERC-CT Senior Member Join Date: May 2010 Location: East Hartford, Ct Posts: 5,898	Re: Help Matching Gas Cap Sponsored Links (Register now to hide all advertisements) Had a similar problem once and cured the problem by cutting a gasket out of a sheet of Neoprene rubber. Cut the OD to fit the inside of the cap with the ID smaller than the center piece. (it will stretch over it ) __________________ DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES