|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-26-2023, 08:35 PM | #1 |
Senior Member
Join Date: Dec 2010
Location: Granville ohio
Posts: 174
|
Change Out Ring and Pinion
I am looking for some one who could change out the 3.25 that was installed in my 39 rear by the po to a 3.78 or 4.11. Prefer some one who is in surrounding area to Columbus Ohio like 4hour trip and knows their stuff. Probably going to a 5 speed behind my FH. Thanks, John
|
10-27-2023, 12:22 AM | #2 |
Senior Member
Join Date: Dec 2014
Location: California
Posts: 802
|
Re: Change Out Ring and Pinion
I had a /36 half-ton very original including faded Ford green. Bought it w/a 4.11 soon purchased a 3.78 by cross-country phone call. Upon arrival, install. Perfect for town roads and in-town in second to third.
You would not enjoy a 4.11 = made for loaded pickups, high rev @ 50mph+ thank you - |
Sponsored Links (Register now to hide all advertisements) |
|
10-27-2023, 04:45 AM | #3 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,307
|
Re: Change Out Ring and Pinion
Maybe you can find some to swap you a ready to go 3.78 rear for yours.
|
10-27-2023, 10:09 AM | #4 |
Senior Member
Join Date: Dec 2010
Location: Granville ohio
Posts: 174
|
Re: Change Out Ring and Pinion
Thinking about the 5 speed and the 29 inch tire is why the 4.11 thought along with the built flathead that is currently in the car. The complete swap would be OK if I could find a good one.
|
10-27-2023, 10:31 AM | #5 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,307
|
Re: Change Out Ring and Pinion
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|