|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-10-2010, 05:53 PM | #1 |
Senior Member
Join Date: May 2010
Location: Princeton, NJ
Posts: 965
|
window regulator spring question
Hello,
On the two-arm regulator (used in the S/W front doors), there is a big spring and a smaller spring. The big spring looks like the single spring used in the rear door's single-arm regulator, but it is about half a turn longer. Does anybody know of either of these S/W springs are equivalent to the springs in the single-arm regulators used by the non-slant cars? The big spring in my driver's door regulator is busted, and I am wondering if it can be replaced with the repro spring that the vendors sell, or if I have to find an original S/W front window spring. Thanks, Doug
__________________
My '31 S/W sedan project:http://31ford.dougbraun.com My restoration diary: http://dougbraun.com/blog |
09-11-2010, 05:51 PM | #2 |
Senior Member
Join Date: May 2010
Location: Princeton, NJ
Posts: 965
|
Re: window regulator spring question
Here's a photo of the larger front window regulator spring and the rear window regulator spring from my S/W sedan. (The larger one is for the front window.)
Is either one of these equivalent to the repro spring that vendors sell? Doug
__________________
My '31 S/W sedan project:http://31ford.dougbraun.com My restoration diary: http://dougbraun.com/blog |
Sponsored Links (Register now to hide all advertisements) |
|
09-11-2010, 07:43 PM | #3 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,390
|
Re: window regulator spring question
Sponsored Links (Register now to hide all advertisements)
Paul in CT |
|
|
Sponsored Links (Register now to hide all advertisements) |
|