|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-23-2017, 10:40 AM | #1 |
Senior Member
Join Date: May 2010
Location: North Las Vegas,Nv/Rainier,Or
Posts: 450
|
40 conv.w/strip channel
The upper door w/strip channels mounted on the top irons appear to be too long by an 1/8 of an inch or so and no provision for any kind of a seal.If I elongated the screw holes I might be able to move the channels back enough.I should not have to do either.The forward screw hole in the channels do not have a matching hole in the top iron.
__________________
Milt/Las Vegas |
|
|
Sponsored Links (Register now to hide all advertisements) |
|