|
01-05-2018, 07:42 PM | #1 |
Member
Join Date: Jun 2010
Posts: 95
|
Model a frame
Have a 1929 frame someone changed the front cross member to 30-31. I would like to go with 30-31.Will all components line up for 30-31, running boards, fender brackets , etc tall rad? steve
|
01-05-2018, 08:34 PM | #2 |
Senior Member
Join Date: May 2010
Location: Camino, CA.
Posts: 3,086
|
Re: Model a frame
You may have to drill a couple of bolt holes, but I think everything should line up.
|
Sponsored Links (Register now to hide all advertisements) |
|
01-05-2018, 10:24 PM | #3 |
Member
Join Date: Jun 2010
Posts: 95
|
Re: Model a frame
are the bolt holes for the body
|
01-06-2018, 04:45 PM | #4 |
Senior Member
Join Date: Oct 2015
Location: Virginia
Posts: 409
|
Re: Model a frame
I think that I read somewhere that the late 29s had the new style cross member and that the factory added washers until the new radiators came out. If so then you may have the original cross member unless you can tell it was messed with.
|
01-06-2018, 06:45 PM | #5 |
Senior Member
Join Date: Dec 2014
Location: Germantown,TN
Posts: 516
|
Re: Model a frame
On Steve's site is everything you need to know about the frame and it's evolution.
http://www.plucks329s.org/frame.htm |
01-06-2018, 08:02 PM | #6 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: Model a frame
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|