Tie Rod Replacement

[spdway1]

My next step is to replace my tie rods:
1) Can I do it without removing my backing plates?

2) Do one side at a time or both at the same time?

3) Any tips or tricks I should know? (I know the threads are different on each side.)

I could not find step-by-step instructions or a YouTube video specifically.

Thank you guys for your help!

[1955cj5]

This may help..

https://www.fordbarn.com/forum/showthread.php?t=251024

[JayJay]

Take a look at Tom Endy's post in the link referenced in #2 above, he describes exactly what you are asking.

[spdway1]

Thank you guys for the link and help!

[katy]

Originally Posted by spdway1

My next step is to replace my tie rods

There is only one tie rod on a Model A.

[spdway1]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by katy

There is only one tie rod on a Model A.

Thanks for your help and valuable insight.
Go back to your mom's cellar.

[gdmn852]

Hello, mine were probably replaced a long time ago, marked at Thompson Products on them I think that’s TRW today.