The Ford Barn

BRENT in 10-uh-C · 12-22-2012, 09:30 AM

Quote:

Originally Posted by columbiA

I run a 33 B with 5.9 head in my coupe and it has lots of power,even with the 2.94 ratio in overdrive.

WOW

Can't be the truth 'cuz some folks around here say a Model-A can't hardly pull a 3.27 gear ratio!!

columbiA · 12-22-2012, 11:09 PM

Brent,My A will pull a 6 % grade in OD without slowing down at all.In 4.11 direct,it dont slow down on any hill in the mountains.

socalplanedoc · 12-27-2012, 03:12 AM

Quote:

Originally Posted by Ross/Kzoo

Is this the kit?

http://www.grainger.com/Grainger/SPO...U63?Pid=search

That's the one

model a mike · 01-02-2013, 09:23 PM

we put the 6.1 head on our 29' hasn't given us any problems so far and there was a difference in power on hills. just rememeber to use a copper gasket not the fiber type. and spray it with copper spray including the block for extra piece of mind. its been a great addition to the t5 tranny we put in ours. runs great !

12-22-2012, 11:09 PM	#22
columbiA Senior Member Join Date: Nov 2011 Location: B.C. Canada Posts: 1,746	Re: High Compression Head - Snyder's 6:1 Brent,My A will pull a 6 % grade in OD without slowing down at all.In 4.11 direct,it dont slow down on any hill in the mountains.

01-02-2013, 09:23 PM	#24
model a mike Junior Member Join Date: Nov 2011 Location: pennsylvania Posts: 14	Re: High Compression Head - Snyder's 6:1 we put the 6.1 head on our 29' hasn't given us any problems so far and there was a difference in power on hills. just rememeber to use a copper gasket not the fiber type. and spray it with copper spray including the block for extra piece of mind. its been a great addition to the t5 tranny we put in ours. runs great !