|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-06-2023, 04:47 AM | #1 |
Junior Member
Join Date: May 2019
Location: New Zealand
Posts: 16
|
Flathead v8 gasket question
I have a question about flathead gaskets: could I use the copper ones in the picture as a replacement for the one below? I know that the centre holes ie triangle, round and square are different. Would this cause a problem ie water flow, or would it have not much of an effect?
|
09-06-2023, 07:28 AM | #2 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,073
|
Re: Flathead v8 gasket question
Yes you can use the copper ones. If you have aluminum heads, I'd recommend the composite ones from Best Gaskets. They call them GraphTite gaskets.
|
Sponsored Links (Register now to hide all advertisements) |
|
09-06-2023, 08:34 AM | #3 |
Senior Member
Join Date: Oct 2011
Location: Shelton, WA
Posts: 3,800
|
Re: Flathead v8 gasket question
What B&S said x2
|
09-06-2023, 11:10 AM | #4 | |
Senior Member
Join Date: May 2015
Posts: 8,181
|
Re: Flathead v8 gasket question
Quote:
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
09-06-2023, 03:56 PM | #5 |
Junior Member
Join Date: May 2019
Location: New Zealand
Posts: 16
|
Re: Flathead v8 gasket question
Thanks, just using iron heads. So there will be no problem with water flow?
|
09-07-2023, 06:41 AM | #6 |
Senior Member
Join Date: May 2010
Posts: 4,753
|
Re: Flathead v8 gasket question
Sponsored Links (Register now to hide all advertisements)
|
09-07-2023, 03:15 PM | #7 |
Junior Member
Join Date: May 2019
Location: New Zealand
Posts: 16
|
Re: Flathead v8 gasket question
42 mercury engine 3 3/16 bore , has raised manifold platform.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|