The Ford Barn

BILL WZOREK · 04-09-2015, 07:47 AM

I know pictures are best , they will follow when my helper comes the end of next week and get car out of the trailer for photo opp.

I'm going to list what I have

1934 5 Window coupe
Needs floor pans ( I talked to Paul Bradley about my Bought & paid for set )
She has juice brakes
Open rear end
Wood kit from Mac's antiques
Some new body panels from Mac's antiques
Grill ( needs some work )
Nice Hood
Hood sides ( maybe 33's )
Rear fenders ( Both )
Front fenders ( Both )
Running Boards ( Both )
Nice head light Buckets
Nice extra 34 Dash ( one in car is chopped up to fit 50 gauges )
3 Speed side shift Trans.
1934 Rebuilt Shocks 2 front 2 rear w arms & links

8Ba Block / Cleaned - shot peened - Magged
Merc Crank ( plugs removed & cleaned )
8 Merc pistons & rods
Also 8 balanced 8Ba rods
L 100 cam ( will require use of Electric fuel pump Fuel pump lobe worn on cam )
Complete valve train including lifters
A Chevy Dist. Machining all ready done
I think I have 2 - 8 CM heads if not I have 2 RT heads
Choice of intake 1X2 or 2X2 or 3X2 or 4X2
Carb Cores 1 -4 as needed
Starter core
8Ba dist. (Core)
Gen. (Core)
Fly wheel
Clutch (Core)
Water Pumps (Core)
Fan w/ Mounting hardware
Polished Timing cover
Oil Pan
Oil pump With pickup tube
Front Pulley
Front bolt & washer
Radiator

As you can see it's pretty much all there.
( although some assembly required )

I have owned this car since 1969 / been gathering parts

Sold with Bill of sale only.

What Might this be worth ??

This has been long but there is a lot there.

04-09-2015, 07:47 AM	#1
BILL WZOREK Senior Member Join Date: May 2010 Location: Florence Ma. Posts: 2,404	1934 5 Window Value ??? I know pictures are best , they will follow when my helper comes the end of next week and get car out of the trailer for photo opp. I'm going to list what I have 1934 5 Window coupe Needs floor pans ( I talked to Paul Bradley about my Bought & paid for set ) She has juice brakes Open rear end Wood kit from Mac's antiques Some new body panels from Mac's antiques Grill ( needs some work ) Nice Hood Hood sides ( maybe 33's ) Rear fenders ( Both ) Front fenders ( Both ) Running Boards ( Both ) Nice head light Buckets Nice extra 34 Dash ( one in car is chopped up to fit 50 gauges ) 3 Speed side shift Trans. 1934 Rebuilt Shocks 2 front 2 rear w arms & links 8Ba Block / Cleaned - shot peened - Magged Merc Crank ( plugs removed & cleaned ) 8 Merc pistons & rods Also 8 balanced 8Ba rods L 100 cam ( will require use of Electric fuel pump Fuel pump lobe worn on cam ) Complete valve train including lifters A Chevy Dist. Machining all ready done I think I have 2 - 8 CM heads if not I have 2 RT heads Choice of intake 1X2 or 2X2 or 3X2 or 4X2 Carb Cores 1 -4 as needed Starter core 8Ba dist. (Core) Gen. (Core) Fly wheel Clutch (Core) Water Pumps (Core) Fan w/ Mounting hardware Polished Timing cover Oil Pan Oil pump With pickup tube Front Pulley Front bolt & washer Radiator As you can see it's pretty much all there. ( although some assembly required ) I have owned this car since 1969 / been gathering parts Sold with Bill of sale only. What Might this be worth ?? This has been long but there is a lot there.